Make a donation

Author Topic: Bonnet catch  (Read 1427 times)

justsean

  • Guest
Bonnet catch
« on: May 25, 2012, 10:50:00 am »
My bonnet catch looks pretty rusty/dodgy, never really thought much of it but the other day when checking oil etc I couldnt get it to lock again it had jammed on 'popped' and wouldnt lock down again...eventually had to pull our a screw driver and push down the lock to 'reset' it and it clicked down. Quote from VW to fix the lock was £112...bit obscene for something that doesnt make it go any faster! does anyone know of a cheaper way of getting it replaced? VW parts website somewhere and DIY job maybe?

Cheers
Sean

Offline Aweful_Truth

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 9
  • Posts: 379
Re: Bonnet catch
« Reply #1 on: May 25, 2012, 07:28:17 pm »
could you pick one up from a scrappy or a breakers yard from ebay and switch them over yourself? can't imagine its too hard
To Bad, So Sad, Bye Bye!

Offline mvb12

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 64
  • Posts: 1539
  • VCDS - Adaptations * Coding * Diagnostics PM Me
    • Email
Re: Bonnet catch
« Reply #2 on: May 25, 2012, 07:35:09 pm »
had the same issue on my old GT FSI.

just buy the unit from VW it will come with the tensioner pully part and replace the whole thing. no more than 20 mins to fit yourself  :happy2:
VCDS HEX NET / VCP / ODIS - COVERING LONDON AND MIDLANDS
VCDS - Adaptations * Coding * Diagnostics PM Me
Canbus Gateway - Supply and fit (Stop battery drain issues)

Offline mb

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 29
  • Posts: 284
Re: Bonnet catch
« Reply #3 on: May 26, 2012, 01:18:28 am »
Had this on mine a few weeks ago.  10 mins with a brush, rag and some 3in1 oil sorted it!

Offline Dannyboy88

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 9
  • Posts: 434
Re: Bonnet catch
« Reply #4 on: May 26, 2012, 05:59:08 am »
£25 for a new lock mec from VW and very easy to fit, wouldn't get one from a scrap yard as you don't know how long it will last.

Offline Gene Hunt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 61
  • Posts: 2478
    • Email
Re: Bonnet catch
« Reply #5 on: May 26, 2012, 06:55:26 am »
Regular use of 3 in1oil & a tin of spray grease does the job.
ED35. Standard factory condition.