Seat belt alarm issue...anyone help

[Saintsteve]

For some reason, when I have a passenger in the front, I intermittently get the fasten your seltbelt alarm go off and it's driving me nuts!!!! .

I've looked on Vcds to see if I can find the controller but can't see where it would be, also where should I be looking where this plugs into the Seat if it's a loose connection??.

I know the wife has lost 4 stone recently , but it's not enough I'm sure to think she's that light lol

Thankyou 

[Jussa]

Does the alarm go off even when the bel is plugged in?? 

I know that the alarm can be removed totally thru VCDS as my mate I'd I for me on my old GTi

[ktlstar]

You have to manually enter the +2 for seatbelt chime in "instruments and then coding"

You'll understand what i mean when your in VCDS.

[rich83]

For some reason, when I have a passenger in the front, I intermittently get the fasten your seltbelt alarm go off and it's driving me nuts!!!! .

I've looked on Vcds to see if I can find the controller but can't see where it would be, also where should I be looking where this plugs into the Seat if it's a loose connection??.

I know the wife has lost 4 stone recently , but it's not enough I'm sure to think she's that light lol

Thankyou 

As above steve... just disable the beeping in VCDS.  

[Saintsteve]

Does the alarm go off even when the bel is plugged in?? 

I know that the alarm can be removed totally thru VCDS as my mate I'd I for me on my old GTi

Yes, both seat belts fastened, just like your driving along and decide to unplug it .. Bing ..bing ...bing ...bing bing ...bing lol

It's annoying as hell!! Only does it for about. 3 or 4 seconds and stops. Normally have to ask the passenger to move in the seat to stop it?

[Tfsi_Mike]

Disabled mine in vcds but can't remember which module it was in.  Didn't take long to find.  Central electronics or convenience.

Are you daaaan saaarf Steve?  If youre passing Nottingham at any point I could have a look

[Saintsteve]

I will try the above, thankyou KTLSTAR  

[Saintsteve]

Disabled mine in vcds but can't remember which module it was in.  Didn't take long to find.  Central electronics or convenience.

Are you daaaan saaarf Steve?  If youre passing Nottingham at any point I could have a look

Any further south and I'd be in the English channel. 

[rich83]

So what ever your first 2 number are, 07 for example. -02.... so 07 becomes 05. Or 23 becomes 21.

[bacillus]

So what ever your first 2 number are, 07 for example. -02.... so 07 becomes 05. Or 23 becomes 21.

I think your first coding is correct if you look at where the ?? are in the long coding helper.

[Saintsteve]

So what ever your first 2 number are, 07 for example. -02.... so 07 becomes 05. Or 23 becomes 21.

So my numbers are 0003403... So which value do I minus 2 off?

[rich83]

Are you looking in the right place? It should only be 5 digits

[Saintsteve]

Where your 07232 number is, is where my 0003403 is??

My nav unit +16 for some reason doesn't list like yours though rich? Mine isn't there.. Although I have a RNS installed

[Shabba168]

Disconnect the 2 pin plug under plastic cover under seat

Job done

[rich83]

Where your 07232 number is, is where my 0003403 is??

My nav unit +16 for some reason doesn't list like yours though rich? Mine isn't there.. Although I have a RNS installed

Thats nit mine steve, just an image i pulled of the net.