Make a donation

Author Topic: Rust on wheel hubs  (Read 782 times)

Offline sam

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 3
  • Posts: 107
  • 127.0.0.1
    • Calibre Connections LLP
    • Email
Rust on wheel hubs
« on: May 29, 2012, 11:35:20 pm »
I have been putting my car through a " deep clean " today as i took the afternoon off work. :happy2:

I noticed that the hubs are covered with rust, whats the best way of restoring this back to silver i would prefer an OEM look so no fancy colours lol.

Any advice as always greatly appreciated.


Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rust on wheel hubs
« Reply #1 on: May 29, 2012, 11:41:03 pm »
i had same problem after getting cleaning solution on them.

hammerite silver paint does the job  :wink:
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline sam

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 3
  • Posts: 107
  • 127.0.0.1
    • Calibre Connections LLP
    • Email
Re: Rust on wheel hubs
« Reply #2 on: May 29, 2012, 11:44:22 pm »
i had same problem after getting cleaning solution on them.

hammerite silver paint does the job  :wink:

Nice........ Do I just sand them down first before spraying??? :signLOL:

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: Rust on wheel hubs
« Reply #3 on: May 29, 2012, 11:45:49 pm »
Best way I'd say would be to take the wheels off and use some wet n dry paper starting with the rougher stuff then a higher grit to buff it up. Then find a rattle can that best matches and respray them up if needs be. It may be that the rust is only a thin layer of oxidation and they come up alright with a bit of elbow grease
Candy weiß Mk6 GTI - Stage 2

Offline sam

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 3
  • Posts: 107
  • 127.0.0.1
    • Calibre Connections LLP
    • Email
Re: Rust on wheel hubs
« Reply #4 on: May 29, 2012, 11:50:20 pm »
Best way I'd say would be to take the wheels off and use some wet n dry paper starting with the rougher stuff then a higher grit to buff it up. Then find a rattle can that best matches and respray them up if needs be. It may be that the rust is only a thin layer of oxidation and they come up alright with a bit of elbow grease

Ok mate thanks for the advice. Not hammerite silver stuff?