Make a donation

Author Topic: Power cut at 4000rpm  (Read 4931 times)

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Power cut at 4000rpm
« on: June 02, 2012, 07:24:04 pm »
Hi all,

Just got my mk5 GTi and have a power issue.

If I floor it in 1st or 2nd it splutters at 4000rpm, the rev counter goes dead, EML and EPC light come on. If I then slow down and shift before 4000rpm it seems fine.

Scanned it for fault and found 1 pending fault p0321.

Would I be right in saying the engine speed sensor (G28) could be at fault?

Anyone experienced/ fixed this fault before?

Offline edd666999

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 89
  • Posts: 2730
    • Email
Re: Power cut at 4000rpm
« Reply #1 on: June 02, 2012, 07:47:26 pm »
Had your coil packs replaced under warranty?

Is your car modified?

Did the error come back after being cleared?

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #2 on: June 02, 2012, 08:11:45 pm »
Mines a 2007 and according to VW they dont need doing?

Fault code hasn't come back yet but car still does it.

It runs fine aslong as I don't hold 1st and 2nd Upto 4k + revs

Offline edd666999

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 89
  • Posts: 2730
    • Email
Re: Power cut at 4000rpm
« Reply #3 on: June 02, 2012, 09:21:25 pm »
is the car standard?

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Power cut at 4000rpm
« Reply #4 on: June 02, 2012, 09:43:09 pm »
Spark plugs?
Diesel Daily Hack.

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #5 on: June 02, 2012, 10:04:48 pm »
Car is fully standard. 42k miles.

Full service inc plugs, cambelt and water pump at 38k.

Google is saying G28 sensor which is the  Engine speed/cam sensor.

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #6 on: June 02, 2012, 10:14:25 pm »
http://www.mk5golfgti.co.uk/forum/index.php/topic,38163.0.html

Same faults as this guy!

Just wondered if that will cure it.

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Power cut at 4000rpm
« Reply #7 on: June 03, 2012, 08:53:56 am »
Car is fully standard. 42k miles.

Full service inc plugs, cambelt and water pump at 38k.

Google is saying G28 sensor which is the  Engine speed/cam sensor.

Did they actually change plugs though, Breeze VW were supposed to have changed mine, but a month later I was having a bad missfire as soon as it came on boost, and that was the plugs...

Need to scan it... though plugs won;t show as a fault...
Diesel Daily Hack.

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #8 on: June 03, 2012, 09:34:12 am »
I don't think it's plugs. Its not really a misfire. More like a power cuts both mechanical and electrical lol.

I think il change the G28 if I can find out where it is!

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #9 on: June 03, 2012, 04:44:59 pm »
Just been out in it again. The fault happens in any gear at exactly 4000 rpm.

It gets to 4000 rpm then the power cuts, rev counter drops so I shift up and the power is back until 4000 rpm again.

Atleast in saving petrol I suppose lol.

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #10 on: June 04, 2012, 04:49:50 pm »
Just done a 40 mile trip and fault has gone!

Will have to keep my eye on it.

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #11 on: June 10, 2012, 09:22:59 pm »
Fault is happening again intermittently so I will be plugging it in again tomorrow.

Kind of hoping it comes up with G28 sensor as it should be a simple fix!

Offline Dan.b

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 197
    • Email
Re: Power cut at 4000rpm
« Reply #12 on: June 16, 2012, 12:31:21 am »
Problem solved with new crank sensor.