General > Product Reviews
UNIbraces XB & UB - Review (UPDATED 23rd Oct)....
Kregiel:
great write up Robin as usual!
I needed spacers on UB for my full milltek exhaust to get enough clearance!
Paul
simonp:
You'll need to check those periodically, as I recall some folks using the extended studs experienced snapping/bending.
RedRobin:
--- Quote from: Kregiel on June 03, 2012, 04:12:12 pm ---
great write up Robin as usual!
I needed spacers on UB for my full milltek exhaust to get enough clearance!
Paul
--- End quote ---
....Milltek Resonated or Non-Res version, Paul?
Clearance problem on your Milltek downpipe?
stealthwolf:
Robin, could you please let us know how long and how much effort it takes for you to remove the XB?
This something I could have been interested in but I could easily need the rear space unexpectedly. I would have liked some kind of "quick" removal system that could be done by hands eg leave in two locking bases and then the main XB could be lifted in/out within seconds.
Kregiel:
--- Quote from: RedRobin on June 03, 2012, 04:59:28 pm ---
--- Quote from: Kregiel on June 03, 2012, 04:12:12 pm ---
great write up Robin as usual!
I needed spacers on UB for my full milltek exhaust to get enough clearance!
Paul
--- End quote ---
....Milltek Resonated or Non-Res version, Paul?
Clearance problem on your Milltek downpipe?
--- End quote ---
I have non resonated version Robin!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version