Make a donation

Author Topic: How much or Flywheel & clutch  (Read 11178 times)

Offline Mertyvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 7
  • Posts: 299
How much or Flywheel & clutch
« on: May 26, 2012, 07:47:02 pm »
Hi all ma mates vw tdi is having rattelning noise coming from the gearbox when we put the clutch down the noise goes when the clutch is up it rattles like a bi:::h  ive done some resear h and found that it is the flywheel now does anyone have any idea on how much it will cost to reapir it to put a new set it. ?
Black 5 Door TDI with BBS Pescaras, R32 Spoiler, Tints All Round. RCD510,CAN 7NO I aint touching the Engine> Im frightened of power :D

My sig pic is still to big.

Offline Superted74

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 65
    • Email
Re: How much or Flywheel & clutch
« Reply #1 on: May 26, 2012, 11:19:44 pm »
From Vw last time I checked around 1200 quid. Normal garage with oem parts still best part of a grand.

If you know someone who can do the job for you and source the parts yourselves it'll save you a lot. It's the labour that kills with this as its gearbox out jobbie

Offline Baz300

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 9
  • -Receive: 26
  • Posts: 707
    • Email
Re: How much or Flywheel & clutch
« Reply #2 on: May 26, 2012, 11:26:19 pm »
When mine went on my focus diesel I bought a single mass flywheel kit from eBay for £200

And put an ad on gumtree asking if anyone could  fit it for me
Got a few replies but 1 guy offerd to do it for £100
 
Luckily he done it within a day and done a good job of it
all in £300

I was getting quotes and all were over £1000

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Re: How much or Flywheel & clutch
« Reply #3 on: May 27, 2012, 12:27:35 pm »
parts with a trade discount from eurocarparts £280 for clutch/flywheel kit - LUK kit
labour was £150

the labour cost of around £150 for a DMF/clutch job on a tdi is about usual for the garages around inner-city birmingham if you know where to look for the decent garages including the VAG specialists, i took it to a cousin/family friends who's a bosch authorised garage and been in the trade for the last 25 years, took them about 5/6 hours to do it all in although they did take their time! that included a wait for the slave cylinder from TPS which was £55 all in

shop around... i know that vw TPS had offers on original DMF's about a week ago for the 1.9 and 2.0tdi's for 288, clutch kit would be another 150 on top of this i would've thought...

MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...

Offline flipmyflipper

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 51
Re: How much or Flywheel & clutch
« Reply #4 on: May 31, 2012, 10:52:38 am »
I recently had both mine done on my 2005 GT TDi and I think it was roughly £450 for a LUK clutch and flywheel and about £200 for the labour. Flywheel going seems to be a common problem on these models. Mine is on 95K and I had no idea when clutch was done last so it made sense to do that at the same time.


2005 Golf GTD - 18" Speedlines|Eibach Sportline Springs|Powerflow S/Steel Exhaust|GTI Lights, Fogs, Bumpers, Side Skirts & Grill|R32 Rear Lights

Offline Mertyvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 7
  • Posts: 299
Re: How much or Flywheel & clutch
« Reply #5 on: June 15, 2012, 10:47:31 am »
Same as mine its in the garage right now at a vw specialist hopefully it wont be too costy but i called up mr clucth they quated me 740. Inc parts & labouR
Black 5 Door TDI with BBS Pescaras, R32 Spoiler, Tints All Round. RCD510,CAN 7NO I aint touching the Engine> Im frightened of power :D

My sig pic is still to big.