Make a donation

Author Topic: ▀▄ BMW Z4– Light Correction Detail + Brake Caliper refurb + Leather Detail ▄▀  (Read 3990 times)

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222

Please take the time to view our full website!!
Detailing In Lancashire Manchester & North West - Miglior Detailing!
If you want to see daily update and photos, please follow us! Links are below!!



BMW Z4 - 3.0si - Sapphire Black

Hi Guys, thanks for reading another write up of mine. This time it's a 2009 BMW Z4!

This car was booked in for:
- Light Correction detail
- Wheels Off detail Including Cquartz Finest on alloys
- Leather detail
- Brake Calipers and discs painted


This car was booked for a light correction detail mainly. This removes the vast majority (normally 90%+) of surface scratches. This is a perfect option for a badly swirled car that needs a huge turnaround without needing to spend 3-4 days off the road. This is my most popular option for cars that are driven daily also. The difference is massive, even though it's not a full correction

The car on arrival.



Very badly swirled, and the paint looking lifeless. No flake showing through.







Here you can see the brakes. They are surely in need of some attention. Its a shame to have a light correction done on a car, and the paint looking stunning, only for the car to be let down by areas like this!



Some stone chips the owner asked me to touch in (this requires an extra night in the unit)



Onto the wash/decontamination stages. This is the engine bay being thoroughly cleaned



I didn't take too many photos of my washing the car, as always, you've seen it before!

Claying… removing a lot of contaminants on the paint a wash would leave behind!



Now the wheels have been removed allowing for steam cleaning of the arches & preparing and painting the brakes!



Brakes before!



And after!





Before



After (the aluminium bells on the front were wire brushed and cleaned rather than painted.



Now it was time to properly clean the wheels! Here iron filings are being removed from the paint surfaces



And after...



Stone chips being touched in… Before



After



Now the next morning the wheels were being prepared for the CQuartz coating.



Coating being applied





Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Now we start with the paintwork!



Before



After







MUCH better right?

Onto the roof…











Moving onto the bonnet now! I will let the photos do the talking!







Large 50/50








Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Even the small areas on the front bumper get the same attention!





Moving onto the sides











Onto the rear end now!







Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222










The A pillars were in dire need of polishing!







With all the polishing now complete, the car was very very dusty! It time to get the wheels back on and get the car outside for another wash!

Copper slip being applied to all the discs to ensure the wheels don't seize on there!





Back on the ground ready to go outdoors!



The wheel bolts were torqued up to manufacturers spec.



Being washed…



Rinsed



Now back inside for the finishing touches.



Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Sealant curing



Leather being thoroughly cleaned



Now, there were a lot of stages after the polishing that I didn't photography due to time restraints (as always!)

Here are some after shots!



























Time taken: Approx. 30 hours

thanks for reading!!



Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Great work as ever buddy!  :congrats:

What did you use on the Aluminium bells? Wire wool? Brush?

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Cheers nath, just used wire brush :0

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Cheers nath, just used wire brush :0

Thanks bud, need to clean up some TT-RS front discs.  :happy2:

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10935
    • Email
excellent job as always  jay :happy2:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Love the turn around. Amazed at the brakes. Any reason why you didn't paint the bells?

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Rob GTI

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 44
  • -Receive: 11
  • Posts: 607
    • Email
The brake refurb really gives it a new car look.  :congrats: What paint did you use of the calipers and bells?
GTI Edition 30 No. 907, 3 door, Black. (Now Sold)