General > Product Reviews
Okada Projects. Plasma Direct ignition coils.
Neilgti:
I'd be upto been a guinea pig on the TSI mk6 running stage 2 Revo
Be good to see some before and after RR results :happy2:
TT-Turbo:
Right guys, I managed to get down to JKM on their dyno for some 25 odd runs and have tested a whole range of possibilities for these coils. I must admit that they did perform quite similar and peak figures are within a few bhp. There was a few themes of what the Okada coils do compared to the OEM that at times held more power that the OEM but overall peak power and torque figures are very similar.
I will scan in the dyno charts and explain the process I went through. The temps inside the dyno room were quite hot today at 29 degrees and running a standard intercooler and also a standard fuel pump may push me towards thinking these coils are needed more for bigger powered engines with larger turbo's.
Anyway I will work on the dyno sheets and look through the logs I have and write up about the dyno runs so you guys can see what went on. I do at the moment think on the level of tune on my 2.0TFSI (stage 2) they may not be the best test of their potential.
RedRobin:
^^^^
That's good to know (about 2.0T FSI Stage 2) and I expect that Jim was quite interested in what you both found too. :happy2:
TT-Turbo:
--- Quote from: RedRobin on August 14, 2012, 07:43:50 pm ---^^^^
That's good to know (about 2.0T FSI Stage 2) and I expect that Jim was quite interested in what you both found too. :happy2:
--- End quote ---
Jim was awesome, very knowledgeable and has given me some great data logs. He worked with me to test all possibilities out and come up with what work and is best. Both his and my opinion is that they are similar to the OEM but was a little hard with the 2.0tfsi to get very consistent runs, especially with the heat. After looking hard at the graphs you can see the trend of the okada coils is they seem to be quite strong in the last 1,000 RPM (up to 10BHP) but before that the graphs on several runs seems to show both coils to be quite evenly matched.
I will post up the graphs tomorrow. Very happy with JKM, great bunch of people there who really know their stuff. Car felt in very good hands! Although only downside is the zort and valance is quite sooty now after so many dyno runs! :grin:
Tfsi_Mike:
:congrats: :congrats: :congrats:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version