Okada Projects. Plasma Direct ignition coils.

[simonp]

What I thought. His car is in a rather higher state of tune, I believe...

[Hedge]

Did Jim try them on his own car at all?

Didn't get a chance to try them on Jim's K04. Would of been good to see though 

I'm guessing you probably ran out of time as Jim is normally up for something like that.

[TT-Turbo]

Did Jim try them on his own car at all?

Didn't get a chance to try them on Jim's K04. Would of been good to see though 

I'm guessing you probably ran out of time as Jim is normally up for something like that.

My wallet was getting thin after 2 hours worth of dyno testing  In reality I should of asked and see what he said. Mean's I will have to travel up to Mr Mike Cupra now for a APR dyno session!

[RedRobin]

^^^^
Mike is a really nice guy too - You'll have a good day 

[Tfsi_Mike]

^^^^
Mike is a really nice guy too - You'll have a good day 

   Thanks Robin 

Afraid I probably wont be around when Dan has time to get to APR as I'll most likely be in Afghanistan.  (getting royally mucked about with deployment dates, was meant to deploy in April  )

[vRSAlex]

TT, are you not running an uprated HPFP?

We can also test the coils on the vRS as well as Mikes car.  Mikes wont be driveable once the top mounts and bushes go on.  Will need an alignment before it can go on the dyno.

[TT-Turbo]

TT, are you not running an uprated HPFP?

We can also test the coils on the vRS as well as Mikes car.  Mikes wont be driveable once the top mounts and bushes go on.  Will need an alignment before it can go on the dyno.

Hi Alex,

No I'm not running an Upgraded HPFP yet, need that and an intercooler really. What is your current set-up on your VRS, the more test cars the better really so happy to chuck them on. I can take a day out to drive up, can't say for sure when I'm next going to be in the general area so this might be the best choice. Let me know what work with you guys 

Cheers,
Dan

[SteveP]

Let me know when you plan to test on Mike as I can bring my Stage 3+ car over to APR as well 

[TT-Turbo]

Let me know when you plan to test on Mike as I can bring my Stage 3+ car over to APR as well 

Will let you know steve, would be great to get another car to see some more results and data. 

[Tfsi_Mike]

Keith's not goin to know what's hit him haha

[Hurdy]

Be very interested to see the outcome of these cars on the dyno. Even better if Keith could test his stage 2+ Golf .:R.  

[vRSAlex]

Be very interested to see the outcome of these cars on the dyno. Even better if Keith could test his stage 2+ Go
F .:R.   

Keith is now running a stage 4 turbo on the R with a gtx2860.  On the stock injectors its maxed out fueling at 405 bhp.  Loads more in it once fueling is sorted.

Got got a lovely custom downpipe on it now! 

I'm popping over to get the vRS on the dyno on Friday if all goes to plan.  Not sure it will have these coilpacks available for then?

[Hurdy]

What's Keith faffing about at. Takes less than half a day to swap the injectors out, put RS4 ones in and fit an RS6 LPFP.

[vRSAlex]

What's Keith faffing about at. Takes less than half a day to swap the injectors out, put RS4 ones in and fit an RS6 LPFP.

Has it been confirmed that the rs6 lpfp is good to use with larger turbos?

I think Keith has now done the fueling upgrades.

[Hurdy]

What's Keith faffing about at. Takes less than half a day to swap the injectors out, put RS4 ones in and fit an RS6 LPFP.

Has it been confirmed that the rs6 lpfp is good to use with larger turbos?

I think Keith has now done the fueling upgrades.

Don't know for sure about the RS6 LPFP.

If he's done the fuelling upgrades I want dyno graphs now