Make a donation
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Really REALLY embarrassing question......  (Read 4591 times)

Offline Hurdy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 137
  • Posts: 7683
Re: Really REALLY embarrassing question......
« Reply #15 on: May 25, 2009, 08:40:02 pm »
I've always put the jack under the car first, so it is tight up against the jacking points and then cracked the bolts loose. Maybe I'm a little bit over careful :laugh: But better safe than sorry :happy2:
Logged
Golf R gone.

Offline holepunch

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 7
  • Posts: 99
    • Email
Re: Really REALLY embarrassing question......
« Reply #16 on: May 25, 2009, 10:36:22 pm »
Does anyone ever use a v small amount of copper grease on the bolts and the mating faces of the alloy and hub?

I would also be v grateful if someone could post a couple of pic of a car on axel stands/trolley jack.

One day I'll get a 4 post lift.
Logged

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: Really REALLY embarrassing question......
« Reply #17 on: May 25, 2009, 10:38:49 pm »
Quote from: holepunch on May 25, 2009, 10:36:22 pm
Does anyone ever use a v small amount of copper grease on the bolts and the mating faces of the alloy and hub?

I would also be v grateful if someone could post a couple of pic of a car on axel stands/trolley jack.

One day I'll get a 4 post lift.

i do use copper grease, dont apply to much to the bolts though
Logged

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Really REALLY embarrassing question......
« Reply #18 on: May 25, 2009, 10:42:24 pm »
Quote from: holepunch on May 25, 2009, 10:36:22 pm
Does anyone ever use a v small amount of copper grease on the bolts and the mating faces of the alloy and hub?

I would also be v grateful if someone could post a couple of pic of a car on axel stands/trolley jack.

One day I'll get a 4 post lift.

Yes i put to much on with the spray stuff and got hung drawn and quartered by Teutonic Tamer.  :grin:

The jacking points are discussed in this thread, we have a similar thread on here but i cant find it.

http://www.golfgtiforum.co.uk/index.php?topic=95479.0
Logged

Offline illyun

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 857
Re: Really REALLY embarrassing question......
« Reply #19 on: May 26, 2009, 01:05:34 am »
Quote from: Ifti on May 25, 2009, 07:23:32 pm

Thanks, and dont laugh!!!!!  :grin:
:grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin:

















Sorry, I help it.  :laugh:  not that I'm any better... a few months ago I slightly damaged a bit of the underbody plastic lining trying to jack the car up - it was in completely the wrong place  :signIWS:  The fact that it was snowing at the time and night time didn't really excuse it as I knew exactly where I was placing it.  I got terrified after that and left it alone.  The next time I attempted it was when I did the S3 I/C job  :rolleye:

Logged

Ifti

  • Guest
Re: Really REALLY embarrassing question......
« Reply #20 on: May 26, 2009, 08:35:57 am »
Quote from: holepunch on May 25, 2009, 10:36:22 pm
Does anyone ever use a v small amount of copper grease on the bolts and the mating faces of the alloy and hub?

I would also be v grateful if someone could post a couple of pic of a car on axel stands/trolley jack.

One day I'll get a 4 post lift.

Wouldnt mind seeing such a pic myself, just for reference......
Logged

Ifti

  • Guest
Re: Really REALLY embarrassing question......
« Reply #21 on: May 26, 2009, 08:36:25 am »
Logged
Pages: 1 [2]   Go Up
« previous next »