Make a donation

Author Topic: New pipercross/revo intake for the mk6 *TSI intercooler talk*  (Read 4544 times)

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Anyone had anyone had some hands on experience with these yet?
Getting one for mine in the next month and was wondering what they were like. saw some at inters and they look a top bit of kit and well finished with the aluminium heat shield and 'stage 2' pipe.
« Last Edit: July 26, 2012, 10:13:42 am by cal tdi »
Candy weiß Mk6 GTI - Stage 2

Offline mkviken

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 13
  • Posts: 313
    • Email
Re: New pipercross/revo intake for the mk6
« Reply #1 on: July 02, 2012, 08:26:03 pm »
I've been considering this for my mk6 for a while now

i will be very interested to see what you think of it.

is your car standard or mapped?

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: New pipercross/revo intake for the mk6
« Reply #2 on: July 02, 2012, 09:06:59 pm »
its not cheap but i dont think its quality can't be questioned. It uses OEM mounting points and fits in the bay really well.

Stage 1 revo map atm and going to stage 2 along with this induction kit and milly tbe  :party: aiming to tip it over 300brake and better the 348lb/ft its at currently
Candy weiß Mk6 GTI - Stage 2

Offline mkviken

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 13
  • Posts: 313
    • Email
Re: New pipercross/revo intake for the mk6
« Reply #3 on: July 03, 2012, 11:21:34 am »
I'm at stage 1 with miltek cat back

will most probably get a down pipe when i can be arsed.

i had an ITG intake but didn't like the sounds it made so removed it. it made more power though.

i will be interested to see what this piper cross one sounds like as its big factor in which intake i will fit.


Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: New pipercross/revo intake for the mk6
« Reply #4 on: July 03, 2012, 01:52:39 pm »

Stage 1 revo map atm and going to stage 2 along with this induction kit and milly tbe  :party: 348lb/ft its at currently

What magic dyno is that on!?
Diesel Daily Hack.

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: New pipercross/revo intake for the mk6
« Reply #5 on: July 03, 2012, 02:04:36 pm »
Dyno dynamics @ corton miller, lincolnshire  :innocent:
« Last Edit: July 03, 2012, 03:47:30 pm by cal tdi »
Candy weiß Mk6 GTI - Stage 2

Offline gazon69

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 20
  • -Receive: 34
  • Posts: 1017
Re: New pipercross/revo intake for the mk6
« Reply #6 on: July 03, 2012, 03:34:35 pm »
Do you have the print out fella. I wouldn't mind seeing this.

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: New pipercross/revo intake for the mk6
« Reply #7 on: July 03, 2012, 03:55:08 pm »
I do. I'll have to get some pics uploaded but I'm usually very poor at getting round to doing this so don't hold your breath.

This is on a mk6 btw which run a higher pressure fuel pump over the tfsi and a similar intercooler to the s3 but plastic end tanks rather than alloy
Candy weiß Mk6 GTI - Stage 2

Offline AndyS

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 5
  • Posts: 95
    • Email
Re: New pipercross/revo intake for the mk6
« Reply #8 on: July 03, 2012, 04:23:56 pm »
Hope this don,t end up in a figure shouting match.. 

My GTI with performance air filter , Miltek , and stage 1 hit 265bhp,, perhapes a little high, but it goes well  :jumping:

 :popcornsoda:

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: New pipercross/revo intake for the mk6
« Reply #9 on: July 03, 2012, 04:38:30 pm »
Hope this don,t end up in a figure shouting match.. 

My GTI with performance air filter , Miltek , and stage 1 hit 265bhp,, perhapes a little high, but it goes well  :jumping:

 I couldn't agree more andy. I'd be happy if my 'dyno readout' said 2bhp so long as it scares me out on the road
Candy weiß Mk6 GTI - Stage 2

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: New pipercross/revo intake for the mk6
« Reply #10 on: July 03, 2012, 04:49:02 pm »
This is on a mk6 btw which run a higher pressure fuel pump over the tfsi and a similar intercooler to the s3 but plastic end tanks rather than alloy

 :confused:
Don't think so unless you've changed it.

Offline jon-tfsi

  • Always Involved
  • ****
  • Thank You
  • -Given: 25
  • -Receive: 27
  • Posts: 404
    • Email
Re: New pipercross/revo intake for the mk6
« Reply #11 on: July 03, 2012, 06:49:57 pm »
The Mk6 GTI has the same IC as later spec S3's Im told.

Awesome GTI sell the Pipercross filter . . . its not cheap. The stage 2 pipe seems not such a good design as others also. It appears to have a step down in diameter well before the turbo. Maybe they did this for  a reason but the APR stg 2 pipe just looks a better design to me.
GOLF R Mk7

Offline mkviken

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 13
  • Posts: 313
    • Email
Re: New pipercross/revo intake for the mk6
« Reply #12 on: July 03, 2012, 06:53:56 pm »
yeah but it has a silicon reducer instead.

Offline cal tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 5
  • Posts: 443
  • dub or die
Re: New pipercross/revo intake for the mk6
« Reply #13 on: July 24, 2012, 01:27:19 pm »
Got the intake all in and fitted and... It's a beauty

Quality is really good with the genuine samco hose and aluminium pipe for the last section. All fitting well to the stock mounting points. But for the money you'd expect nothing less.

As for noise iv done approx. 50miles since it was fitted yesterday and can honestly only say I've heard induction noise 3-4 times when I was listening out for it which is suprising considering the size of it. Might have had something to do with the sound coming from the milltek though  :laugh:
Candy weiß Mk6 GTI - Stage 2

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: New pipercross/revo intake for the mk6
« Reply #14 on: July 24, 2012, 01:37:44 pm »
The Mk6 GTI has the same IC as later spec S3's

Having swapped mine for an S3 cooler I can tell you it's not.