Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Clutch kit  (Read 1088 times)

Offline Nato

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 34
    • Email
Clutch kit
« on: July 12, 2012, 09:09:12 am »
My clutch has starTed to slip after stage 1 re map..... Any recommendations for an uprated clutch???
car is 30 edition gti.
cheers
Logged

Offline Kregiel

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 20
  • Posts: 469
  • Supersonic
Re: Clutch kit
« Reply #1 on: July 12, 2012, 10:00:52 am »
Your options are Sachs, Helix, South Bend being most popular here. Then if you want single mass flywheel it will be more exensive and noisier but more durable and pleasurable to drive as car revvs better...

I have south bend stage 3 with SMF and can't fault it. It's the cheapest of the three. Some peeps had issues with Sachs ones.

Best is to have a read on the forum

Paul
Logged
Red 2008 GTI, H&R ARB, b12 suspension, walk, milltek non-res full exhaust, forge IC, tarox 10 pot big brake kit, RS4 valve, Forge SSK, Autotech HPFP, Xenons, K04 Turbo, Quaife LSD, South Bend stage 3 Daily with SMF clutch, XB and UB Unibraces

Offline TT-Turbo

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 18
  • Posts: 188
Re: Clutch kit
« Reply #2 on: July 12, 2012, 10:10:59 am »
Quote from: Kregiel on July 12, 2012, 10:00:52 am
Your options are Sachs, Helix, South Bend being most popular here. Then if you want single mass flywheel it will be more exensive and noisier but more durable and pleasurable to drive as car revvs better...

I have south bend stage 3 with SMF and can't fault it. It's the cheapest of the three. Some peeps had issues with Sachs ones.

Best is to have a read on the forum

Paul

Hey Paul, hope the diff is treating you well. How are you finding the SMF with the south bend stage 3 clutch? Would you say it's good for a daily drive and is there much noise coming from the SMF?

Dan
Logged

Offline Cheeky

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 5
Re: Clutch kit
« Reply #3 on: July 12, 2012, 06:36:36 pm »
Quote from: Nato on July 12, 2012, 09:09:12 am
My clutch has starTed to slip after stage 1 re map..... Any recommendations for an uprated clutch???
car is 30 edition gti.
cheers

I had the same happen to me after a stage 1 remap on an Edition 30

I went for the Sachs clutch and i didn’t like it at first, lots of judder pulling away in first and the clutch felt ever so heavy but after 500 to 1000 miles i like it now.

Paul
Logged

Offline Kregiel

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 20
  • Posts: 469
  • Supersonic
Re: Clutch kit
« Reply #4 on: July 12, 2012, 10:44:00 pm »
hi Dan,

The diff is brill piece of kit. Up there with the best mods I've done to my car! No wheel spin at all in dry and with K04!

I am happy with SMF South Bend clutch as biting point is great and only slightly heavier than stock. The car revs very eagerly. I don't mind the ocassional noise at idle as my car with the mods and engine mounts is noisy already. However if somebody looks for refinement I wouldn't advise SMF clutch

Paul

Logged
Red 2008 GTI, H&R ARB, b12 suspension, walk, milltek non-res full exhaust, forge IC, tarox 10 pot big brake kit, RS4 valve, Forge SSK, Autotech HPFP, Xenons, K04 Turbo, Quaife LSD, South Bend stage 3 Daily with SMF clutch, XB and UB Unibraces

Offline Nato

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 34
    • Email
Re: Clutch kit
« Reply #5 on: July 13, 2012, 02:08:46 pm »
thanks for info guys !!!! :happy2:
Logged
Pages: [1]   Go Up
« previous next »