All Things Mk5 > How to Guides / Troubleshooting

Auto electrician in Yorkshire area???

(1/1)

Tfsi_Mike:
Removed the power supply to the light in my boost gauge (was trying to eliminate the cause of a burning smell   :confused:)

It was piggy backed on my ciggetette lighter power supply from the fuse box and i accidentally snipped the wire to cig lighter (which i need to power my sat nav on sunday on drive through europe)

Cig lighter needs reconnecting to fuse box....

Helllllllllllllllp  :sad:

Hurdy:
It should just be a matter of stripping back the wire and simply put in a 4 point connector Mike. Have you snipped it at a really awkward spot or is there plenty of wire either side of the cut?

Tfsi_Mike:

--- Quote from: Hurdy on May 28, 2009, 10:54:50 pm ---It should just be a matter of stripping back the wire and simply put in a 4 point connector Mike. Have you snipped it at a really awkward spot or is there plenty of wire either side of the cut?

--- End quote ---

It reaches the back of the fuse box with 10mm of wire bared.  it goes into a single square on the back of the fuse box, not sure if it gets soldered in as bare wire or uses a bullet connector or something.

Navigation

[0] Message Index