Make a donation

Author Topic: How Make Engine Cover Fit With A ITG Fitted?  (Read 2059 times)

Offline dominikpee

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 36
    • Email
How Make Engine Cover Fit With A ITG Fitted?
« on: July 22, 2012, 11:06:20 am »
Has any one got a guide how to make the engine cover fit while having a ITG Maxogen fitted?

Dominik

Offline RedED30

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 3
  • Posts: 176
Re: How Make Engine Cover Fit With A ITG Fitted?
« Reply #1 on: July 24, 2012, 11:11:56 am »
I think there are a couple around or some have replaced with an FSI cover i believe.

Have a look in the members rides section. There are some pics in there.
Revo Stage2 - With Linear Throttle
Revo DSG
BCS Turboback Powervalve - This is a must.
ITG Closed Intake.. wooosh

Here to enjoy and help, with a hint of sarcasm, please do not be offended

Offline MC71

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 413
  • -Receive: 427
  • Posts: 5198
  • Mk7 R
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,113185.0.html
Re: How Make Engine Cover Fit With A ITG Fitted?
« Reply #2 on: July 24, 2012, 05:45:07 pm »
Have a look at these.

http://www.mk5golfgti.co.uk/forum/index.php/topic,11138.0.html

http://forums.vwvortex.com/showthread.php?3573551-


Fit the Induction kit into the car and You will get a good idea at what needs removing. It's not too hard, just take your time, use a mutlitool and cut away.  When done, should look like this:-





hope that helps.   :happy2:
.                              

                    Build thread Stage 2+ Edition 30 ~~Clicky here~~

Offline dominikpee

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 36
    • Email
Re: How Make Engine Cover Fit With A ITG Fitted?
« Reply #3 on: July 25, 2012, 06:23:35 pm »
Thanks guys for helping me out..this will be a nice little project for the weekend.

Dominikpee

Offline big al

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 27
  • -Receive: 93
  • Posts: 2607
    • Email
Re: How Make Engine Cover Fit With A ITG Fitted?
« Reply #4 on: July 26, 2012, 10:08:48 am »
I did mine some time ago, and have done a number of them for others since as well.
Takes a bit of time to do, but once you get the hang of it it's quite straight forward.
I also used a soldering iron on the side part to cover up the internals.


Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Re: How Make Engine Cover Fit With A ITG Fitted?
« Reply #5 on: July 26, 2012, 10:46:21 am »
Here's Mine :happy2: