How Make Engine Cover Fit With A ITG Fitted?

[dominikpee]

Has any one got a guide how to make the engine cover fit while having a ITG Maxogen fitted?

Dominik

[RedED30]

I think there are a couple around or some have replaced with an FSI cover i believe.

Have a look in the members rides section. There are some pics in there.

[MC71]

Have a look at these.

http://www.mk5golfgti.co.uk/forum/index.php/topic,11138.0.html

http://forums.vwvortex.com/showthread.php?3573551-


Fit the Induction kit into the car and You will get a good idea at what needs removing. It's not too hard, just take your time, use a mutlitool and cut away.  When done, should look like this:-





hope that helps.   

[dominikpee]

Thanks guys for helping me out..this will be a nice little project for the weekend.

Dominikpee

[big al]

I did mine some time ago, and have done a number of them for others since as well.
Takes a bit of time to do, but once you get the hang of it it's quite straight forward.
I also used a soldering iron on the side part to cover up the internals.

[ianv5]

Here's Mine