Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Coding cruise control  (Read 2440 times)

Offline Yetisimon

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 22
    • Email
Coding cruise control
« on: July 25, 2012, 04:48:20 pm »
Hi
My cars in having a service and cruise control fit by a vw dealer but I've just had a call saying there having trouble coding the cruise control just wounding if any body has come across his before ?
Logged

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Coding cruise control
« Reply #1 on: July 25, 2012, 05:03:25 pm »
Incompetent franchised dealers, sadly yes  :jumping:

The only reason I can see they would be having a problem is if the steering controller is not suitable or if they've done something wrong.

What car is it?
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Coding cruise control
« Reply #2 on: July 25, 2012, 05:18:18 pm »
I see from your posts that it is a GTi Ed30 2007

Either the dealer has done something wrong or I bet your controller has 638 0070 HW SW

Maybe you should have used someone on here instead of using the dealers.
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline jedi-knight83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 12
  • -Receive: 41
  • Posts: 1355
    • Cambridge Autogleam Detailing
Re: Coding cruise control
« Reply #3 on: July 25, 2012, 06:21:08 pm »
the ed30 2007 i did the other day was different to when i did my earlier caddy / golf.

Wouldnt let me into 'coding' section so had to do it via long coding.

all worked fine though.
Logged
Golf GTI DSG "ED30 Tribute" - RTech: 254bhp / 323lbft | MK6 GTI DSG S.Wheel | MK6 GTI speedo | MK6 climate | RCD510DAB | Bluetooth | Milltek Cat back | H&R Springs & Rear ARB | WALK | 19" BBS CH | MK7R 340mm brakes - INFO

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Coding cruise control
« Reply #4 on: July 25, 2012, 06:24:50 pm »
Quote from: jedi-knight83 on July 25, 2012, 06:21:08 pm
the ed30 2007 i did the other day was different to when i did my earlier caddy / golf.

Wouldnt let me into 'coding' section so had to do it via long coding.

all worked fine though.

if the coding is long, then the activation is in there otherwise it is in the coding II
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline Yetisimon

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 22
    • Email
Re: Coding cruise control
« Reply #5 on: July 25, 2012, 09:22:10 pm »
The only reason I put it into a vw dealer is I couldn't find anyone in Kent area that could do it in time. But at the end of the day vw quoted one hour to do it so I'm only paying one hour !
Logged

Offline olsen-72

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 338
  • Redditch
Re: Coding cruise control
« Reply #6 on: July 25, 2012, 09:48:08 pm »
Quote from: Yetisimon on July 25, 2012, 09:22:10 pm
vw quoted one hour to do it so I'm only paying one hour !

Wow. only?? 1 hour in my VW Dealer - 120 quid - thats cheap. I dont' know hows in Kent maybe cheaper. And 1 hour just for codding is a rip off.
Logged
STAGING/NEEDLE SWEEP ON ALL WHITE CLOCKS
LIT NEEDLESS, MILES TO EMPTY
GENUINE CAN GATEWAY - SUPPLY AND FIT
CRUISE CONTROL -  SUPPLY AND FIT ALL VW's
CLOCKS CODING - VW SEAT SKODA UP TO 2014
SCIROCCO CLOCKS CONVERSION

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Coding cruise control
« Reply #7 on: July 25, 2012, 09:54:09 pm »
A standard MK5 install can be done in circa 15mins.  An hour is giving themselves plenty of time.
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline olsen-72

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 338
  • Redditch
Re: Coding cruise control
« Reply #8 on: July 25, 2012, 10:20:24 pm »
Quote from: vRStu on July 25, 2012, 09:54:09 pm
A standard MK5 install can be done in circa 15mins.

True

Quote from: vRStu on July 25, 2012, 09:54:09 pm
An hour is giving themselves plenty of time.

For a tea time  :grin: :grin:
Logged
STAGING/NEEDLE SWEEP ON ALL WHITE CLOCKS
LIT NEEDLESS, MILES TO EMPTY
GENUINE CAN GATEWAY - SUPPLY AND FIT
CRUISE CONTROL -  SUPPLY AND FIT ALL VW's
CLOCKS CODING - VW SEAT SKODA UP TO 2014
SCIROCCO CLOCKS CONVERSION

Offline Yetisimon

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 22
    • Email
Re: Coding cruise control
« Reply #9 on: July 25, 2012, 10:20:59 pm »
Hour to fit and code and they did say it would only take about 45 mins. There's problems with it now so it's down to them to sort it out !
Logged
Pages: [1]   Go Up
« previous next »