Changed all my bulbs for SuperWhite LEDs

[MC71]

^^^^ page 6, half way down. 

Carlo, may be worth putting all relevant info in your OP regarding pics, Matt's email etc? Same questions keep coming a round (no ones fault).

 

[alexmccabe]

^^^^ page 6, half way down. 

Carlo, may be worth putting all relevant info in your OP regarding pics, Matt's email etc? Same questions keep coming a round (no ones fault).

 

So I've been right so far then. Heh, but the glovebox LED won't work. =/ and yeah, I've tried both ways...

[alexmccabe]

Found the issue, the metal pins on the connector weren't connecting properly. Being the idiot that I am, I just shorted out the fuse trying to put the connectors right without taking the light plug out. What a boob. =/

If I am not mistaken, it's fuse 15, the 7.5 amp one. Right?

Well I hope it is the fuse and nothing more sinister. Anyway, they were looking nice until I did that.

[MC71]

^^^^ Yeap! 

[Johnny_tro]

Question -I changed the rear interiors to led-did you guys have to widen the wholes of the cover? The led bulbs re too big for the holes

[alexmccabe]

Question -I changed the rear interiors to led-did you guys have to widen the wholes of the cover? The led bulbs re too big for the holes

In which holders? I actually had the opposite problem on some. haha.

[Johnny_tro]

Rear panel in the centre of the roof. Put the bulbs in had to file a bit of the plastic frame as it would not fit back overthe bulbs

[alexmccabe]

Rear panel in the centre of the roof. Put the bulbs in had to file a bit of the plastic frame as it would not fit back overthe bulbs

Oh... well, no. You take the plastic frame off, take the old bulbs out, put the frame back on, then put the new LED's in...

[Mertyvw]

I cant seem to get the size correct is the number plate led 36mm or 39mm ??

[monte]

I cant seem to get the size correct is the number plate led 36mm or 39mm ??

36mm 

[Cooper]

Just fitted a set of these to my mk6 with no issues apart from having bend the pins slightly on the one for the glovebox to allow the bulb to fit, top service by Matt!

[Falky]

Just fitted my set, brilliant! side lights were a bit of a bugger to do but all working and looking well! thanks Matt!

seems the glovebox pins being a bit slack is a common issue as I had to tighten them up as well.

[monte]

Well done lads. Really is a great Mod for little money 

[bm_99]

Has anyone bought the sidelights from matt?, if so any pics of them on please

cheers

[Falky]

Has anyone bought the sidelights from matt?, if so any pics of them on please

cheers

I'll try and get some later when its dark, just tried in daylight but you cant really see them that well, personally I love the look of the whiter lights, but thought it looked a bit daft with the standard headlights so I've ordered some MTEC bulbs to match.