Make a donation

Author Topic: Fitting a RCD510 and Security Code  (Read 12819 times)

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Fitting a RCD510 and Security Code
« on: July 29, 2012, 09:53:34 am »
Hi all,

OK am about to purchase a RCD510 to replace my RCD500...

No I know about the aerial adapter i require, and have the installation guides etc, but was concerned about the security code... does this need to be entered by VCDS? (something i don't have)

ANything else i should be aware of?

Cheers,

Dom
Diesel Daily Hack.

Offline olsen-72

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 338
  • Redditch
Re: Fitting a RCD510 and Security Code
« Reply #1 on: July 29, 2012, 10:01:01 am »
Hi
The scurity code (PIN code) is 4 digit number and the seller should give u that when u buy it. It has nothing to do with VCDS. When u fitting the radio in ur car it will ask u for that code. If u dont have the correct code it wont start.
STAGING/NEEDLE SWEEP ON ALL WHITE CLOCKS
LIT NEEDLESS, MILES TO EMPTY
GENUINE CAN GATEWAY - SUPPLY AND FIT
CRUISE CONTROL -  SUPPLY AND FIT ALL VW's
CLOCKS CODING - VW SEAT SKODA UP TO 2014
SCIROCCO CLOCKS CONVERSION

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Fitting a RCD510 and Security Code
« Reply #2 on: July 29, 2012, 10:03:52 am »
Hi
The scurity code (PIN code) is 4 digit number and the seller should give u that when u buy it. It has nothing to do with VCDS. When u fitting the radio in ur car it will ask u for that code. If u dont have the correct code it wont start.

Thank you... It will come with the code, but wanted to know how you enter it... ALso how do I get the code from my RCD500 unit which I intend to sell on?

Cheers again,

DOm
Diesel Daily Hack.

Offline olsen-72

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 338
  • Redditch
Re: Fitting a RCD510 and Security Code
« Reply #3 on: July 29, 2012, 10:24:08 am »
When u firs time switch on ur radio it will ask for a code. To get the code for ur ori radio u can ask VW dealer to get it. But it must be still fitted in ur car
STAGING/NEEDLE SWEEP ON ALL WHITE CLOCKS
LIT NEEDLESS, MILES TO EMPTY
GENUINE CAN GATEWAY - SUPPLY AND FIT
CRUISE CONTROL -  SUPPLY AND FIT ALL VW's
CLOCKS CODING - VW SEAT SKODA UP TO 2014
SCIROCCO CLOCKS CONVERSION

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Fitting a RCD510 and Security Code
« Reply #4 on: July 29, 2012, 11:05:05 am »
Is the dealer the peeps able to get my old units code? Or anyone with vcds?

I have a security card in the owners manual but no details grrr.

Thanks for your help.

Dom
Diesel Daily Hack.

Offline bakili

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 11
  • Posts: 311
    • Email
Re: Re: Fitting a RCD510 and Security Code
« Reply #5 on: July 29, 2012, 02:38:36 pm »
I just took serial number to dealer and they did give me code for rcd 300 which was fitted from factory to my car.
After you fitted rcd 510 it will ask you code before start up, you need input code once after that car will remember code and next time you remove rcd 510 you don't have input code again.

Sent from my HTC One

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Fitting a RCD510 and Security Code
« Reply #6 on: July 29, 2012, 03:03:54 pm »
So have I got to remove it to get the serial number?
Diesel Daily Hack.

Offline olsen-72

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 21
  • Posts: 338
  • Redditch
Re: Fitting a RCD510 and Security Code
« Reply #7 on: July 29, 2012, 03:07:31 pm »
No. Serial number u can get from VCDS but i think u will need ur reg too.
STAGING/NEEDLE SWEEP ON ALL WHITE CLOCKS
LIT NEEDLESS, MILES TO EMPTY
GENUINE CAN GATEWAY - SUPPLY AND FIT
CRUISE CONTROL -  SUPPLY AND FIT ALL VW's
CLOCKS CODING - VW SEAT SKODA UP TO 2014
SCIROCCO CLOCKS CONVERSION

Offline SeanMk5

  • Just Arrived
  • **
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 22
Re: Fitting a RCD510 and Security Code
« Reply #8 on: August 06, 2012, 02:39:20 am »
Sorry to hijack the thread but thought it would be better than starting a new one...

If i get my hands on an RCD510 but don't have the code how easy is it to get the code? One going on ebay cheap and was hoping it wouldn't be too difficult to get a code?


Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
Re: Fitting a RCD510 and Security Code
« Reply #9 on: August 07, 2012, 06:36:57 am »
Sorry to hijack the thread but thought it would be better than starting a new one...

If i get my hands on an RCD510 but don't have the code how easy is it to get the code? One going on ebay cheap and was hoping it wouldn't be too difficult to get a code?



As long as It's genuine and not reported stolen, VW should have no issue's providing you the code for the RCD510.
Also, it's not crucial that you get an aerial adaptor. You can merely remove the plug off of your current aerial adapator and plug them onto the new RCD510.

Offline SeanMk5

  • Just Arrived
  • **
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 22
Re: Fitting a RCD510 and Security Code
« Reply #10 on: August 07, 2012, 07:08:09 am »
Sorry to hijack the thread but thought it would be better than starting a new one...

If i get my hands on an RCD510 but don't have the code how easy is it to get the code? One going on ebay cheap and was hoping it wouldn't be too difficult to get a code?



As long as It's genuine and not reported stolen, VW should have no issue's providing you the code for the RCD510.
Also, it's not crucial that you get an aerial adaptor. You can merely remove the plug off of your current aerial adapator and plug them onto the new RCD510.

Thanks for that info  :happy2:

Offline Ant.W28LKR

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 310
  • Edinburgh
    • Email
Re: Fitting a RCD510 and Security Code
« Reply #11 on: November 13, 2013, 01:31:07 pm »
I've just searched for this topic.   I've bought a RCD510 got it all fitted swapped over the  aerial plugs, sat it all in. Switched it on and up comes "welcome to vw". Next pops up enter your code.  Eh I don't have the code, I bought it off ebay the advert clearly stated that it came with code. I've checked for a sticker and in all the packaging but no code anywhere.  Grrrr!!!!!

I've mailed the seller to get the 4 digit code, I'll need to wait and see what response I get now.   Nothing's ever easy!!!

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Fitting a RCD510 and Security Code
« Reply #12 on: November 13, 2013, 01:35:17 pm »
if you cant get the code from the seller, let me know. I can point you in the direction to someone who can get them.


Offline Adam-golf

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 323
  • Derv!
    • Email
Re: Fitting a RCD510 and Security Code
« Reply #13 on: November 13, 2013, 01:42:03 pm »
I took my stereo to vw and they done it for free

Offline York_GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 125
    • Email
Re: Fitting a RCD510 and Security Code
« Reply #14 on: November 14, 2013, 12:20:07 pm »
I'm looking to sell the RCD510 that came with my MK6 as standard.  Is there an easier way to get the code rather than contacting the dealer?


if you cant get the code from the seller, let me know. I can point you in the direction to someone who can get them.



Thanks
VCDS Hex-USB +CAN (North Yorkshire)

Carbon Steel Grey 5 door 2010 (60) Golf MK6 GTi DSG / Leather / RCD510 / 18" Monza Alloys

Carbon Steel Grey 3 door 2011 Golf MK6 GTD DSG / RNS510 / Leather (NOW SOLD)

Tornado Red 5 door 2009 Golf MK6 GTi DSG / 18" Monza Alloys / PDT Stage 1 Remap - 261 BHP (NOW SOLD)

Black 3 door 2006 Golf MK5 GTi Manual / 18" Monza Alloys / PDT Stage 1 Remap & HPFP - 262 BHP (NOW SOLD)