Author Topic: Surely it's got to be possible to...... (Read 1143 times)

MPS · « **on:** July 31, 2012, 03:27:16 pm »

.... convert a non-MFSW into one that will accept the mfsw buttons and looms! Can't be that difficult surely?!

reflex11 · « **Reply #1 on:** July 31, 2012, 03:36:49 pm »

actually the difficultly rating is close to brain surgery! look good

MPS · « **Reply #2 on:** July 31, 2012, 03:43:15 pm »

impossible is nothing. Especially with a hacksaw!

Save some money as well to go to the new CECM!

nadlad · « **Reply #3 on:** July 31, 2012, 06:41:56 pm »

Surely u just swap the buttons and loom over

rich83 · « **Reply #4 on:** July 31, 2012, 06:45:55 pm »

Surely u just swap the buttons and loom over

Eddie-NL · « **Reply #5 on:** July 31, 2012, 06:47:19 pm »

I know of someone who did, he cut a lot of the rubber out with a dremel and used silicone to stick the buttons in

looked ok, but the airbag was tight in the steering wheel

Jonny · « **Reply #6 on:** July 31, 2012, 08:16:47 pm »

But I am wrong to say there is a lot more work involved when you've got a manual?