Make a donation

Author Topic: Clay bar  (Read 1175 times)

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
Clay bar
« on: August 09, 2012, 07:08:53 pm »
I have just used bilt hamber clay bar and I cut it up I to a 1/4.
It did collect some dirt but up against the new block there isn't much difference in colour is it ok to re use or shall I throw it out?

Thanks !

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Clay bar
« Reply #1 on: August 09, 2012, 07:28:26 pm »
I tend to use a new piece each time I clay the car. There's nothin stopping you from keeping it and using it say for the wheels.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline nads1_uk

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 9
  • Posts: 334
Re: Clay bar
« Reply #2 on: August 09, 2012, 07:58:02 pm »
Does claying alloys remove stubborn brake dust

Offline nathangallo

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 4
  • Posts: 509
    • Email
Re: Clay bar
« Reply #3 on: August 09, 2012, 10:41:03 pm »
Ye I would like to know this also as my brother wants to attack his BMW. But he used his car with pads worn so there is almost rust on the wheels it's that bad, what is the best for this.
Iron-x ! Maybe

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Clay bar
« Reply #4 on: August 09, 2012, 11:16:24 pm »
clay will help with bonded-on contaminants but iron-x will help with brake dust crap.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline silent dubber

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 209
    • Readers Ride
Re: Clay bar
« Reply #5 on: August 10, 2012, 11:13:52 am »
My normal way of attacking that would be

1 spray and allow to soil a wheel cleaner
2 jet that down
3 ironx let soils then
4 jet down
4 then clay once all contamiants are off


Silent Dubber

Instagram:- harveyrooprai
build thread - http://www.mk5golfgti.co.uk/forum/index.php/topic,51322.0.html