Make a donation

Author Topic: Rehan GTI on a budget!  (Read 4243 times)

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Rehan GTI on a budget!
« on: August 13, 2012, 11:07:20 am »
Hi,

Had my GTI a couple of months now.  Currenty its as I bought it, standard car apart from some R32 replica alloys.

First Job was to get cambelt & waterpump service done and cam follower changed, done at Awesome in Irlam.

Changed the back tyres as they were sawtoothing.

Emissions light came on a few weeks ago but with help from bacillus with VAG-COM it was code P0441 which was cleared.  Hasnt returned as yet and advice given by bacillus was not to fill fuel tank to brim which is what I always did.  Seems to be working.

I use the GTI everyday about 350 miles a week so need it to be practical in terms of modding for everyday use.  Plans are performance wise to get it to stage 2 and upgrade the suspension on a budget thought, most things sourced second hand.

My first mod carried out this weekend was fitment of a boost gauge, I wanted to see if the car was making correct boost and for future mods seemed a good idea.  I used the guide psoted by john_o in the product review section which was great.  Unfortunatly budget couldnt stretch to a Defi boost gauge so bought one from RS-Spec ebay store, blue stepper motor psi gauge £40.00.  Managed to get a Forge boost fitment kit off tommy_a which made life a lot easier and straight forward neat boost tap from inlet manifold.  The whole process took me near 3hrs, longest part was taking the electrical wire into the car via the rubber gromet behind battery.  The rest was fairly straight forward.  As the gauge was electrical I didnt need to take the vacum hose into the car, just up to the boost sensor which I attached behind the battery cover.

Colour match with interior blue/red lights was good.  Ive just attached it on top of the dash with some double sided tape in the pod & holder which came with the gauge, not the neatest finish but does the trick for now.  May look to get vent pod when budget allows.

Max boost reading I'm getting is around 12psi.

Total Cost:

Boost Gauge £40.00
Forge boost Kit second hand £10.00
Wires/connectors/tools £10.00

£60.00 all in.  :happy2:

Couple of pics.....





« Last Edit: August 13, 2012, 11:10:24 am by TIGER-UPPERCUT »
2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1

Offline scopes

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 131
  • -Receive: 115
  • Posts: 2283
  • Wolfsburg Edition
    • My GTI
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,49748.0.html
Re: Rehan GTI on a budget!
« Reply #1 on: August 13, 2012, 12:55:53 pm »
Looks well, Nice colour of blue

 :happy2:
If it's not broke, Mod it.....



Silver is the way !

Offline c0v3rt

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 92
Re: Rehan GTI on a budget!
« Reply #2 on: August 14, 2012, 09:37:19 pm »
Yeah nice car! That blue looks great in the sun!

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Re: Rehan GTI on a budget!
« Reply #3 on: August 29, 2012, 12:32:29 pm »
Update:

Managed to get some KW V1 off my brother for a silly cheap price as he went for V2 in the end.  Had some SuperPro front Wishbone bushes fitted at the same time.

Had these fitted by Prosport in Stockport who are most well know in the Subaru world but are now getting into the VAG scene having bought in all the relevant equipment and diagnostic computers.  It was a pleasure dealing with them and James who did the work on my car was excellent.  A few pics below of the install:

































Can go lower on front another 2cm of coil thread left...about 1cm left at rear.

Pleased with the ride, deffo stiffer than stock but much better damping.  I would have liked to be able to control the damping, can see why people opt to goto V2 as I would have liked it to be a bit more stiffer ride but for everyday driving I think its fine.








2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1

Offline chrisr763

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 0
  • -Receive: 62
  • Posts: 1777
    • Email
Re: Rehan GTI on a budget!
« Reply #4 on: September 07, 2012, 12:19:28 pm »
Such a nice colour. Not so fond of the wheels, but its all personal opinion! Great looking car

Offline Tortaruga

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 36
  • -Receive: 105
  • Posts: 1527
Re: Rehan GTI on a budget!
« Reply #5 on: September 07, 2012, 09:44:51 pm »
What's with the mudflaps?

What's with the manky tailpipes?

 :wink:

You know you have a NI Reg Plate?

Lovely car BTW and with xenon warrior princesses!
« Last Edit: September 07, 2012, 09:49:12 pm by Tortaruga »
'07 Red manual

Offline Ree

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 6
  • Posts: 161
Re: Rehan GTI on a budget!
« Reply #6 on: September 08, 2012, 12:35:04 am »
Out of interest how much did you lower the front and rear ?

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Re: Rehan GTI on a budget!
« Reply #7 on: September 09, 2012, 06:03:54 pm »
Such a nice colour. Not so fond of the wheels, but its all personal opinion! Great looking car

Agree. Wheels came with the car will be getting changed at some point. Probably last on my list.
2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Re: Rehan GTI on a budget!
« Reply #8 on: September 09, 2012, 06:11:45 pm »
What's with the mudflaps?

What's with the manky tailpipes?

 :wink:

You know you have a NI Reg Plate?

Lovely car BTW and with xenon warrior princesses!

Mudflats oh yeah never noticed them before lol. They look factory to me leaving them on.

Standard exhaust system yeah it is manky. Next on my list.
2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Re: Rehan GTI on a budget!
« Reply #9 on: September 09, 2012, 06:15:10 pm »
Out of interest how much did you lower the front and rear ?

Not sure mate I never measured the standard hight. I can measure up as is if its any help?
2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1

Offline TIGER-UPPERCUT

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 103
Re: Rehan GTI on a budget!
« Reply #10 on: November 02, 2012, 03:35:56 pm »
Stage 1 Remap at R-Tech (Standard Engine bar K&N pannel Filter)



241@4920 BHP
299.6@3055 Torque

Car feels really good on the road, the increase in midrange power & torque is fantastic.

Power tales off at top end possible weak acctuator.

Graph temp is stated as 17.3c and humidity 100%? not sure? what you guys reckon?
« Last Edit: November 02, 2012, 03:40:47 pm by TIGER-UPPERCUT »
2006 GTI - KWv1 - Poly Fronts - K&N Panel Filter - RTech Stage 1