just had a r-tech remap

[Tamiyoman]

As I replied to a few other BCS Powervalve owners  in PM's, mine was the first one fitted ( ) and yes my Pipe did come off, the pipe was clipped onto underside of car and then a Jubilee clip added to hold it on, it has not come off since (touch wood).

My ED30 has a Jabba stg 2 Map and made 316hp and 342lb/ft, it made 297bhp at R-Tech on a scorching hot day (in the mid 80's) and the Powervalve pipe had come off, it then went back to Jabba for tuning for DSG remap (R-tech) and it made better figures, but fuel pump was holding it back to that

[gigolo456]

I still can't work out which pipe it is that has come off your Ed 30's!!?? Can you elaborate plse as to where on your car it came off?? 

[dan930]

I still can't work out which pipe it is that has come off your Ed 30's!!?? Can you elaborate plse as to where on your car it came off?? 

If its still connected you won't b able to see it unless you jack the car up and look underneath

[gigolo456]

well i am sure it's still connected, otherwise i'd be limp no doubt!!?? 

[Tamiyoman]

well i am sure it's still connected, otherwise i'd be limp no doubt!!?? 

You won't be in limp mode, unless you thrash it 100% of the time and drive with windows open or stereo on you might not notice immediately (took me 3 days to realise), the pipe that came off (sure I already answered this in PM to you tho) is the one at the back that attaches to rear silencor where the powervalve is located 

[gigolo456]

think i can safely say no pipe has come off (touch wood). Have you been contacted yet btw by BCS reference this kit they will be sending out to all Powervalve owners?

[Tamiyoman]

think i can safely say no pipe has come off (touch wood). Have you been contacted yet btw by BCS reference this kit they will be sending out to all Powervalve owners?

Not yet no, but then again I dont expect them to contact me as they know mine will not be falling off again (Belt n braces fix)

[gigolo456]

ahh, i'd still speak to them if i were you, this is a separate issue (for want of a better word); plse read earlier parts of this thread for a better understanding of what i mean..

[dan930]

Just had a email from dave(bcs)..he will send out the re-location bits on tuesday

[gigolo456]

Yeap, he rang me earlier, should have them Tuesday r Wednesday! When are you next at R Tech then, lol??

[dan930]

Yeap, he rang me earlier, should have them Tuesday r Wednesday! When are you next at R Tech then, lol??

Just have to wait now for the bits to arrive & trying to arrange a dayoff without the misses knowing..& when u going to r-tech mate

[gigolo456]

Booked bak in on 6th of next mth, I sincerely hope this repositioning kit gives the car an even livelier kick! ;-)

[dan930]

Booked bak in on 6th of next mth, I sincerely hope this repositioning kit gives the car an even livelier kick! ;-)

I hope so too...would be happy with 330-340bhp & 330-340lbft

[Tamiyoman]

ahh, i'd still speak to them if i were you, this is a separate issue (for want of a better word); plse read earlier parts of this thread for a better understanding of what i mean..

Just dropped Nige BCS an email (changed address in last 2 weeks  ), see what they say, if it is going to need doing I may well get the oil changed at same time.

[dan930]

Anyone received the re-location bits yet??