Hurdy's Golf .:R.

[alexmccabe]

Hi George,

Mistubishi Evo MR FQ400

BHP   405 @ 6400rpm
Torque (lbs/ft)   350 @ 5500rpm
BHP/Ton   292
0-60mph   3.5s
0-100mph   9.3s
60-100mph   5.8s
1/4 Mile   12.25s
Terminal Speed   114mph
Kilometre   N/A
Top Speed (mph)   175

Speed   10mph   20mph   30mph   40mph   50mph   60mph   70mph   80mph   90mph   100mph
Time..   0.3s....   0.7s....   1.2s....   1.8s....   2.6s...   3.5s....   4.7s...   6.1s....   7.7s....   9.3s
Distance   0.7m   3.4m..   9.5m   . .19.5m   35.9m   55.9m   .92m.   138.9m   201.1m   270.2m

Mine.....

392bhp
460lbft
bhp/ton - 265

Bloody hell that's a quick motor! Haha

[Hurdy]

Looking good John,  I was planning on coming over but snowed under with diy. How you finding the bilsteins,  gonna be my next mod I think

Bilsteins are brilliant Gaz

Not too harsh on the road, but you can crank them up nicely for track.

[Cupra R]

Looking good John,  I was planning on coming over but snowed under with diy. How you finding the bilsteins,  gonna be my next mod I think

Bilsteins are brilliant Gaz

Not too harsh on the road, but you can crank them up nicely for track.

I agree 

[danishmkvgti]

Looking good John,  I was planning on coming over but snowed under with diy. How you finding the bilsteins,  gonna be my next mod I think

Bilsteins are brilliant Gaz

Not too harsh on the road, but you can crank them up nicely for track.

Way better than the KW V3 i had before, excellent daily ride and firm on the track, plus you can adjust them in the pit without taking them off the car 

[mdmay]

Hurdy,

are you still using the standard Golf R intercooler?

[bacillus]

Hurdy,

are you still using the standard Golf R intercooler?

With WMI an IC upgrade isn't necessary.

[Hurdy]

Yes, the IC is still stock.

Not really an issue at stage 2+ especially when running wmi.

[gigolo456]

Well that's saved me a few hundred quid lol, as I will be getting the WMi v soon! Now what to spend it on.....!?

[TimH]

thats a fast car, damn :)

[dokez]

Hurdy, What do you monitor the WMI ? I.E if it fails whilst running an aggressive setting ?

[Hurdy]

Hurdy, What do you monitor the WMI ? I.E if it fails whilst running an aggressive setting ?

I haven't got any failsafe mechanisms for the WMI but I don't run aggressive settings - at the moment!

[Hedge]

Just wondering John but do you plan for an LSD in this?

[Hurdy]

Just wondering John but do you plan for an LSD in this?

Not at the moment. If I have to do the clutchpacks at a later date then an LSD is likely to go in too.

[Hedge]

 

[Hurdy]

Mine is finally ready for fitting too... 

Matt metallic grey along with gloss black, deleted the Audi badge and filled in the recess, re-painted the TFSI badge section and finished off with 3M gloss carbon vinyl. Don't know if the 3M vinyl will last under the bonnet but it is gloss black underneath, so no biggie to remove if needed