Hurdy's Golf .:R.

[Hurdy]

Sunglasses Ron did a very respectable 16.6seconds in his ed30 stage 2+ dsg.

And still holds the stock K04 record  How sad am I? 


Only just seen your Pod times John, didn't realise you were going before the Fast Show? Awesome times mate and with some magic juice and weight saving could get seriously close to the 10 sec bracket!!! 

It was a quick car that ED30 of yours Ben.
I reckon it will run an 11.2 on race fuel with the seats out.
I'd be really happy with that and anything under that and I'd have a smile on my face a mile wide.

[Hurdy]

New sparkplugs and R8 coilpacks fitted.

Coilpacks ARE different to the OEM ones. Seem to be less prone to failure and give a stronger spark, a "halfway hose" between OEM and Okada's for a quarter of the cost.

Info.........http://www.golfmk6.com/forums/showthread.php?t=45050

 

[Hurdy]

Bought this off a guy I know who is going with a smoothed front. Needs a little TLC for the badge but otherwise the carbon fibre is mint. 



Currently it is in pieces awaiting a replacement badge and I'll respray the back grill. I'm debating taking out the centre with the Dremel as I'm sure it would be a neater fit?

[Gti_Mad]

looking god mr hurdy  whats the rough cost of your turbo kit ??

[Hurdy]

£4,700 inc vat for the kit and turbo.  Remember though that there is a fair amount of support parts that I already have fitted.

The kit includes turbo, downpipe, fitting parts and pipes and intake pipe to the turbo after the MAF.

[vRSAlex]

£4,700 inc vat for the kit and turbo.  Remember though that there is a fair amount of support parts that I already have fitted.

The kit includes turbo, downpipe, fitting parts and pipes and intake pipe to the turbo after the MAF.

Charlie isn't releasing prices quite yet until everything is finalised.

[Scooby mic]

If you want to compaire your times get on mlr sprint
Brill thread by the way

[Hurdy]

If you want to compaire your times get on mlr sprint
Brill thread by the way

Cheers, just looked on the MLR forum and it looks like a good series of events.

[Hurdy]

Update....

A bit of bling added. RevoZsport carbon fibre grille added. Matches well with the bonnet. 

[RedRobin]

^^^^
Extremely good match and very individual too. The word is "Quality!" 

[Pikey Motorsports]

looking good.. you going to run bonnet pins?

[rich83]

Thank god the pattern goes the same way 

[Tfsi_Mike]

Just needs; wing mirrors, door skins, tailgate, roof skin lol 

[Hurdy]

I have some bonnet pins, but not really bothered about using them as they aren't really necessary.

LOLd at the CF direction Rich as I thought the same.

I've considered a few more CF parts, specifically wing mirrors and rear spoiler.

Quite fancy the steering wheel and interior trim too.

[RedRobin]

I have some bonnet pins, but not really bothered about using them as they aren't really necessary.

....Have you forgotten what happened to my OEM bonnet catch at the Nurburgring?

The CF direction further unifies it but I would still have done that mod if it went the other way. OCD springs to mind for some folks - Is the weave angle exactly the same?