Make a donation

Author Topic: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help  (Read 3961 times)

keendean

  • Guest
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #15 on: August 21, 2012, 08:01:42 pm »
It's just a little daunting, but will update how I get on. 
I was thinking of phases, to see what worked best. That and won't always have the spare time I'd like. So it's going to have to be trail and error for a little while  :happy2:

Offline nads1_uk

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 9
  • Posts: 334
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #16 on: August 21, 2012, 08:36:00 pm »
Hi there fella I know it sounds confusing and I'm a novice like yourself. I tried snow foam and claying for the first time this weekend. I practised on the wife's car just in case something went wrong.  This was what I did;
Power rinse
Quick wash 2BM
Rinse
Iron x mainly on wheels
Rinse
Clay
Rinse
Quick wash 2BM
Dry
SRP
Sealed wheels
Wax car and wheels
Dressed tyres

All in all took 4 hrs (I know what you mean about kids my daughter loves the pressure washer) but even the wife commented how good her car looked. It's a black 1 series and the paint was worse than my 05 gti. The way I look at it doing even a little bit at a time is better than nothing. Now just got do mine properly

HTH

Andy
« Last Edit: August 21, 2012, 08:37:36 pm by nads1_uk »

keendean

  • Guest
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #17 on: August 21, 2012, 11:05:44 pm »
Hey Andy,

Swift work in four hours  :happy2:
What did you use to dress tyres, plus at the moment I have swirls, I was thinking on black hole after Srp, then wax to fini.
Well that's what I'm trying time allowing. Also what do you use to seal the alloys?

I'll time myself, and over time, I may get quicker  :congrats:

Roll on Friday, and lots of new products to use.
How easy was it to clay bar? A little common sense and patience ?
Thanks  :laugh:
« Last Edit: August 21, 2012, 11:12:03 pm by keendean »

Offline Tortaruga

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 36
  • -Receive: 105
  • Posts: 1527
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #18 on: August 21, 2012, 11:20:45 pm »
I thought my single bucket, sponge, chamois and bottle of Zipwax wash'n'wax was all I needed

Wonderful. As a kid I washed my Dad's Polo this way. He used to give me a pound.

'07 Red manual

Offline maxload

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 41
  • -Receive: 29
  • Posts: 663
  • Edition30 - No.1819
    • Email
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #19 on: August 22, 2012, 09:42:26 am »
Hey Andy,

Swift work in four hours  :happy2:
What did you use to dress tyres, plus at the moment I have swirls, I was thinking on black hole after Srp, then wax to fini.
Well that's what I'm trying time allowing. Also what do you use to seal the alloys?

I'll time myself, and over time, I may get quicker  :congrats:

Roll on Friday, and lots of new products to use.
How easy was it to clay bar? A little common sense and patience ?
Thanks  :laugh:


On my tyres I use Megs endurance tyre gel which is brilliant. To seal my wheels I use Super natural hybrib which can be used on the paint , but also makes for a fantastic wheel sealent.
As for the claying , make sure you keep the car well lubed , do one panel at a time and you'll get it done in no time. Remember if you drop the clay bin it and use a fresh piece  :happy2:

Good luck mate  :wink:

Offline nads1_uk

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 9
  • Posts: 334
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #20 on: August 22, 2012, 09:47:26 pm »
As above used megs endurance tyre gel. As for claying I was so nervous before, take it steady use plenty of lube or I used water with bilt hamber and don't apply too much pressure

keendean

  • Guest
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #21 on: August 23, 2012, 08:57:12 am »
The DJ lube, on the bottle says it needs to be diluted with water? But then also says it makes 500ml, it's already been diluted? My water is hard as rocks, so will leave water marks. Do you guys dilute it.

Thanks for the tips, tyre gel, will have to wait, I am brass  :party:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #22 on: August 23, 2012, 09:45:22 am »
Born slippy usually comes in two types - ready mixed (normally has spray head) and concentrate (will say on the bottle; no spray head).

The GTI isn't just a machine. It's very much a living, breathing thing.

keendean

  • Guest
Re: Newbie-Clay Virgin + wax-Correct Process+ Poorboys application-Help
« Reply #23 on: August 23, 2012, 01:41:12 pm »
It has a spray head, but instructions say to dilute, hence my confusement  :drinking: