Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Changing Rear Valence  (Read 799 times)

Offline brown-1234

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 131
    • Email
Changing Rear Valence
« on: August 21, 2012, 10:07:28 pm »
Hi

So i changed my rear valence on my GT140 to the GTI one today and ive noticed that the wheel arch linner does not match the new bumper, I didnt know this before changing as i was told it was straight swap. Anyone know best place to try and find off cuts ?

Also i was wondering if the upper part of the rear bumper is different ? Just the GTI valence does not look flush with the bumper like the 140 on used to.

Any one done this to there and found the same ?

Thanks
Logged

Offline johnston

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 104
    • Email
Re: Changing Rear Valence
« Reply #1 on: August 22, 2012, 10:43:29 am »
not done exactly that but i changed my gti one for a r32 one and the liner didnt fit the same, i.e holes didnt line up, i just made some new holes and cable tied it on..
Logged

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Changing Rear Valence
« Reply #2 on: August 22, 2012, 10:45:52 am »
^^^^
What would we do without cable ties!?  :laugh:

Don't forget to inform your insurer about this body part change.
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline johnston

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 104
    • Email
Re: Changing Rear Valence
« Reply #3 on: August 22, 2012, 05:29:55 pm »
haha, i know robin they come in too handy!
Logged

Offline Fletch..gti

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 220
    • Email
Re: Changing Rear Valence
« Reply #4 on: August 22, 2012, 05:41:00 pm »
Just about to replace my valance , gti it's like for like . I take it , it should fit ok with out messing about ? First time taking bumper off so a little worried about it
Logged

AA

  • Guest
Re: Changing Rear Valence
« Reply #5 on: August 22, 2012, 06:49:37 pm »
 The GTI valance needs GTI arch liners and GTI flaps.
  I noticed the fitment wasn't quite right. I explained this to the paintshop and when I got the car back it was sorted.
 I obviously didnt do a great job of attaching the valance :signLOL: :signLOL:
Logged
Pages: [1]   Go Up
« previous next »