Author Topic: How to change front wiper motor and linkage (Read 5518 times)

wokaworld2001 · « **on:** August 24, 2012, 04:02:43 am »

Hi, i have recently snapped the wiper linkage but now cant find any details on how to change it, I.E step by step or youtube video etc
Any help would be great as am without wipers at the moment
Cheers!

ianv5 · « **Reply #1 on:** August 24, 2012, 09:05:38 am »

Try this link although it is for the Can gateway removal on a r32 the first part of the guide shows how to remove wiper motor etc

http://www.r32oc.com/topic/29242-canbus-gateway-location-removal/

Hope it helps.

wokaworld2001 · « **Reply #2 on:** August 24, 2012, 09:56:10 am »

Cheers for that mate, think that will help a lot

ianv5 · « **Reply #3 on:** August 24, 2012, 10:07:21 am »

Glad to help

wokaworld2001 · « **Reply #4 on:** August 24, 2012, 12:52:13 pm »

Just one more question mate, when refitting the wipers do I have to put them at 12 o'clock ie the service mode?
Thanks again!

ianv5 · « **Reply #5 on:** August 24, 2012, 01:31:35 pm »

I don't know as I removed the blades in the down position.

wokaworld2001 · « **Reply #6 on:** August 24, 2012, 03:41:33 pm »

Yeah think I will do the same, also is there a knack to getting the wiper arm off if it's seized?

Author Topic: How to change front wiper motor and linkage (Read 5518 times)

wokaworld2001

How to change front wiper motor and linkage

ianv5

Re: How to change front wiper motor and linkage

wokaworld2001

Re: How to change front wiper motor and linkage

ianv5

Re: How to change front wiper motor and linkage

wokaworld2001

Re: How to change front wiper motor and linkage

ianv5

Re: How to change front wiper motor and linkage

wokaworld2001

Re: How to change front wiper motor and linkage