Door Controller-What version-Fitting BoldSport door warning

[Eddie-NL]

you have GEN 1 or 2

[GTI-Pirelli]

The two big wires entering the module are the power into the door. Red/Yellow is power and Brown is Ground. Buzz the ground through to the pins on the 32-pin connector.

According to this page; http://www.my-gti.com/2158 Power is pin 1 and ground is pin 2 on the Gen 1 or 2

[GTI-Pirelli]

Oh, and RE: the puddle lights. I'll get some pictures of them on later (when it gets dark!). I used the my-gti page for the pinout and verified it with a multimeter. I used 4 x 4-pin LED's in each mirror on a strip of veroboard.

At the moment the LED's pull around 1/2 of the current of a bulb so I get a "Electrical fault in circuit" warning. I intend to add additional LED's to bring the power consumpition up to the 5W of the bulb and kill the error. They work fine though.

[keendean]

The two big wires entering the module are the power into the door. Red/Yellow is power and Brown is Ground. Buzz the ground through to the pins on the 32-pin connector.

According to this page; http://www.my-gti.com/2158 Power is pin 1 and ground is pin 2 on the Gen 1 or 2

Did exactly that, I've found power and ground- just waiting for mate to vag con it, and find time to do other three doors :)