Make a donation

Author Topic: PCV issues?  (Read 1288 times)

Offline SteveS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 14
  • -Receive: 10
  • Posts: 1300
PCV issues?
« on: August 30, 2012, 11:44:04 am »
I have 2007, Ed30.

I'm starting to think i have a bad PCV, sometimes the revs jump around, idle is chunky at times.

How can i test the current one? I have taken the dip-stick out and it runs rough, as expected..

If i was to purchase the new REV, am i right in thinking its: 06F129101N ?

Cheers guys

SOLD!! :(
VW GTI Edition 30 No. 0551
Revo Stage2+ (LT) | Evoms Intake, K&N Filter | VWR LSD | Milltek R32 TBE | VWR Engine Mounts | VWR Big Front & S3 Rear Brakes | VWR Springs |  VWR Shortshift | SuperPro Bushes |  Recaro Seats

Saintsteve

  • Guest
Re: PCV issues?
« Reply #1 on: August 30, 2012, 11:48:24 am »
^^^ yes that's the correct one..


If you haven't hanged it Steve, I would as it might be the original one, and more then Likely duff.

Offline SteveS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 14
  • -Receive: 10
  • Posts: 1300
Re: PCV issues?
« Reply #2 on: August 30, 2012, 11:59:08 am »
Probably, but would like to check the old one if possible?

But failing that, any cheap places to buy.. i assume VW wont be..

SOLD!! :(
VW GTI Edition 30 No. 0551
Revo Stage2+ (LT) | Evoms Intake, K&N Filter | VWR LSD | Milltek R32 TBE | VWR Engine Mounts | VWR Big Front & S3 Rear Brakes | VWR Springs |  VWR Shortshift | SuperPro Bushes |  Recaro Seats

Saintsteve

  • Guest
Re: PCV issues?
« Reply #3 on: August 30, 2012, 12:04:49 pm »
Probably, but would like to check the old one if possible?

But failing that, any cheap places to buy.. i assume VW wont be..

You could remove it and just blow and suck down the valve to see if it works without having to blow and suck for England... :signLOL:

It doesn't taste too good, so don't suck too hard  :wink: