Make a donation

Author Topic: Airbag issue - any help?  (Read 648 times)

Offline suave

  • Always Involved
  • ****
  • Thank You
  • -Given: 31
  • -Receive: 3
  • Posts: 233
Airbag issue - any help?
« on: September 11, 2012, 10:15:18 am »
Folks

I have had a few issues with an airbag warning light which i put down to putting the baby seat in the back and having to move the passenger seat.

Thing is that i have been to a garage this morning and the light wont be switched off - the guy said he had done a fix before and it cost £400!!!!

Does this sound right? Anyone had an issue like this with theirs?

I have MOT today so it will fail as this light is on.

cheers

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Airbag issue - any help?
« Reply #1 on: September 11, 2012, 10:27:15 am »
is your car 2004 - 2006?

needs the plug cutting out and soldering the wires

where are you located
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Airbag issue - any help?
« Reply #2 on: September 11, 2012, 11:15:51 am »
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline suave

  • Always Involved
  • ****
  • Thank You
  • -Given: 31
  • -Receive: 3
  • Posts: 233
Re: Airbag issue - any help?
« Reply #3 on: September 11, 2012, 11:46:20 am »
Thanks Eddie. Just failed mot on the light

Offline Aweful_Truth

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 9
  • Posts: 379
Re: Airbag issue - any help?
« Reply #4 on: September 11, 2012, 11:49:28 am »
I had my air bag light turned off by a local VW specialist non dealer charged me a fiver as i forgot to turn the ignition off when removing the steering wheel airbag, while the light was on as a precaution I did the wire solder and have had no issues since :)
To Bad, So Sad, Bye Bye!

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Airbag issue - any help?
« Reply #5 on: September 11, 2012, 01:02:55 pm »
Folks

I have had a few issues with an airbag warning light which i put down to putting the baby seat in the back and having to move the passenger seat.

Thing is that i have been to a garage this morning and the light wont be switched off - the guy said he had done a fix before and it cost £400!!!!

Does this sound right? Anyone had an issue like this with theirs?

I have MOT today so it will fail as this light is on.

cheers

If it is a three door the problem is caused by the act of repeatly moving the seat which over time loosens the airbag connector. As Eddie mentioned the two options are to either remove the plug and hard solder the wires together or get a replacement plug and replace it.

Very easy to do but if you give us a hint as to where you are MAYBE somebody will help for the price of a couple of beers :)
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!