Make a donation

Author Topic: Stage 1 k03 powergain with Milltek tbe  (Read 1488 times)

Offline Pullafacial

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 74
    • Email
Stage 1 k03 powergain with Milltek tbe
« on: September 14, 2012, 01:10:01 pm »
Hi all, currently have a k03 gti on an Rtech stage 1 map and a forced air filter.
What powergains and differences can I expect to achieve by adding a Milltek TBE.

Thanks

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #1 on: September 14, 2012, 01:33:31 pm »
You really need the software to be tweaked for the tbe so don't expect too much of extra hp with your present map.
Without traction power is nothing!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #2 on: September 14, 2012, 02:35:47 pm »
.
I would have to look it up but I think that on my K03 GTI with Revo Stage1 and only a flat panel filter in the OEM box, with the Milltek TBE (which I had fitted a long time before any remap), my car dyno'd at about 220-230 bhp on JKM's Dyno-Dynamics rollers.

I don't know what the R-tech Stage1 remap is like.

What's important is the smoothness of the curves on the dyno plot rather than the bhp number. Also that the AFR plot is nicely flat and even.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #3 on: September 15, 2012, 04:38:37 pm »
.
I would have to look it up but I think that on my K03 GTI with Revo Stage1 and only a flat panel filter in the OEM box, with the Milltek TBE (which I had fitted a long time before any remap), my car dyno'd at about 220-230 bhp on JKM's Dyno-Dynamics rollers.

I don't know what the R-tech Stage1 remap is like.

What's important is the smoothness of the curves on the dyno plot rather than the bhp number. Also that the AFR plot is nicely flat and even.

My stage one R-tech map with K&N panel filter and pre-cat removed made just over 241bhp on JKM's rollers on the last dyno day. Very smooth curves too (see Feb dyno day thread near the back).

You should get around 15bhp from a Turbo back exhaust  :happy2:
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline Pullafacial

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 74
    • Email
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #4 on: September 15, 2012, 08:09:16 pm »
Is that with or without another map?
Mine made 243 with stage 1, nice map.
If I fit the exhaust and get the map tweaked, is that what's refered to as stage 2?

Cheers

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #5 on: September 15, 2012, 10:29:10 pm »
Is that with or without another map?
Mine made 243 with stage 1, nice map.
If I fit the exhaust and get the map tweaked, is that what's refered to as stage 2?

Cheers

You ought to get the map "tweaked" for the TBE - I'm sure Nick won't rip you off for that  :grin:

Was your 243bhp on JKM's rollers or R-Tech?
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline Pullafacial

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 74
    • Email
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #6 on: September 16, 2012, 11:25:49 am »
On Rtech's rollers  :smiley:

Offline EckReid

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 28
Re: Stage 1 k03 powergain with Milltek tbe
« Reply #7 on: September 16, 2012, 07:37:26 pm »
Is that with or without another map?
Mine made 243 with stage 1, nice map.
If I fit the exhaust and get the map tweaked, is that what's refered to as stage 2?

Cheers

I believe that is known as stage2, I had a Miltek tbe on my Golf and with stage2 Revo but was never too concerned about figures. All for the noise really!!

Also if you get a tbe with sports cat, I have a decat pipe that I'd be willing to sell?

Alec