All Things Mk5 > Superchips Zone

Stage 2 bluefin K03

(1/3) > >>

dave:
Hi guys i know its been covered before but just really wanting to double check before i buy anything really, fitted an ITG maxogen open filter induction kit aswell as a full TBE decat BCS powervalve system and installed stage 2 and 1st 2nd and 3rd gears it pulls all the way to the redline :happy2: Put it into 4th 5th or 6th though and at about 5krpm it seems to lose power and slow down now it was on stage 1 and never had this bother before!

Is it a case of buying uprated HPFP internals and thats it? or will that need another map from superchips, also is there other things i should be checking.
Just last week i fitted the new revision G diverter valve.

Any help would be great guys

Thanks Dave

Saintsteve:
get some logs done with VCDS. That will help you find the answer  :happy2:

dave:
you think it would be worth doing the fuel pump internals anyway? week on saturday its going on the rollers so will get it checked over then but was wanting it 100% before then really

Saintsteve:
Rollers and get the diagnosis , or log it to find the fault. KO3 with a SC map should run on stock internals in the fuel pump.

dave:
Okay thanks saintsteve im trying to find someone nearby that has vagcom now and will get some logs done and see whats what

Navigation

[0] Message Index

[#] Next page