All Things Mk5 > Superchips Zone

Stage 2 bluefin K03 4500 flat spot dyno graph inside!

<< < (3/3)

Baz300:
Only 240bhp from a claimed 260bhp from superchips?

I'm on stage 2 but had to get it toned down as the standard pump could not deliver enough fuel

I have a flat spot too with the toned down map but looking at your dyno map I may be going revo soon

dave:
Baz if you have a look at my map its not a flat spot more of a loss of power as soon as it hit 4500! So I was making 245 bhp at 4500rpm. I have a revised map from them and its better but not perfect so I've left it now and I am going to see dave at PDT next year to get it custom mapped instead of pissing about with plug and play stuff

rtechniki:
Looks like cut due to fuel "trims" exceeding +10% could be LPFP fault or blocked filter  you need to log short term fuel trims to see whats going on.

Or it could be a bosch torque reduction routine beccause they have left one of the load axis set stock.

But to pin pint the issues you really need to spend an hour or 2 logging the ecu

Nick

Navigation

[0] Message Index

[*] Previous page