Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Armrest... Now with video  (Read 2000 times)

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Armrest... Now with video
« on: October 12, 2012, 06:17:25 pm »
Hi all,

Fitted my arm rest today with my existing centre console. But I don't know if I'm being paranoid but it feels like its not as solid as it felt from the car i got it from?! It feels like there is play from side to side. All torx bits are in on the bottom two on the back sides and one at the front near the handbrake.

If anyone has an opinion on their own armrest quality after fitting that would be awesome help.

Cheers.
« Last Edit: October 13, 2012, 12:47:08 pm by Antvw »
Logged

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Armrest...
« Reply #1 on: October 12, 2012, 06:51:19 pm »
Logged

Offline brookesb32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 75
  • Posts: 1068
Re: Armrest...
« Reply #2 on: October 12, 2012, 07:17:46 pm »
To be honest mine moves a little from side to side - as you mentioned not too many screws holding it down, especially at the front
Logged
VCDS cable HEX-USB+CAN. New but can do the basics including coding

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Re: Armrest...
« Reply #3 on: October 12, 2012, 07:41:26 pm »
Cheers for the link, but from what I can see I have everything apart from number 16 but I can't see that doing much.

I did get the centre console which matched too so think il check if there are any fixings to that which are more structural.

Cheers for the replies!
Logged

Offline Gene Hunt

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 61
  • Posts: 2478
    • Email
Re: Armrest...
« Reply #4 on: October 13, 2012, 07:04:47 am »
Mine was factory fitted but does feel rock solid & no movement on it?.
Logged
ED35. Standard factory condition.

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Re: Armrest...
« Reply #5 on: October 13, 2012, 12:17:14 pm »
Something can't be right then, just gonna upload a video of how much movement I have.

I'm seriously thinking of taking the thing out and having no arm rest  :fighting:
Logged

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Re: Armrest...
« Reply #6 on: October 13, 2012, 12:44:44 pm »
« Last Edit: October 13, 2012, 12:46:32 pm by Antvw »
Logged

Offline brookesb32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 75
  • Posts: 1068
Re: Armrest... Now with video
« Reply #7 on: October 13, 2012, 01:34:44 pm »
Hmmm that does seem to have more movement than mine, is the plastic top positioned down tightly so that the clips on the edges push into the cage underneath?
Logged
VCDS cable HEX-USB+CAN. New but can do the basics including coding

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Re: Armrest... Now with video
« Reply #8 on: October 13, 2012, 02:34:47 pm »
Just found a screw I missed out under where the screw for the cup holder goes. It's better, but I cave over a screw hole in the same area which goes through the side. But there is nothing it secures to and the outter cover covers it. Strange lol

I think I can live with it as it is now its much better, but there must be something not right somewhere.

Cheers for the replies
Logged

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Armrest... Now with video
« Reply #9 on: October 13, 2012, 02:41:15 pm »
It sould be more rigid

are you the guy who PMd me on uk-mkivs?
If so I will have a look at it when you come for coding
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline Antvw

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 0
  • Posts: 66
    • Email
Re: Armrest... Now with video
« Reply #10 on: October 13, 2012, 02:48:14 pm »
Quote from: Eddie-NL on October 13, 2012, 02:41:15 pm
It sould be more rigid

are you the guy who PMd me on uk-mkivs?
If so I will have a look at it when you come for coding

Yeah that's me Eddie.

That would be awesome.

As for the coding we spoke about I don't suppose you know the part numbers for the bits I need?

Thanks Eddie   :smiley:
Logged
Pages: [1]   Go Up
« previous next »