Make a donation

Author Topic: Which uprated DV?  (Read 6255 times)

Offline revo carl

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 82
    • Email
Re: Which uprated DV?
« Reply #15 on: June 25, 2009, 09:55:23 am »
having experienced many DV's i would say it's all down to preferance, the piston style aftermarket DV's are good and hold boost well but the OEM DV's have a much smoother driving characteristic.

Personally i would run OEM in my own car for daily use..... but with a 3071 i'd go aftermarkert :)

Offline tony_danza

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 112
  • Posts: 3013
  • The voice of objective reason, but mine's best.
Re: Which uprated DV?
« Reply #16 on: July 01, 2009, 04:29:20 pm »
Well, a good few hundred miles under its belt and some 1/4 mile action and its performing very well.... I hope this continues.

Oh, banged the Revo settings back to what they were before it went too... even better with the new DV  :happy2:
Sideways yo!

Offline andeep

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 33
    • Email
Re: Which uprated DV?
« Reply #17 on: July 02, 2009, 02:06:32 pm »
Using the revision D myself, is keeping up very well as I rag the car a lot. Holding 22psi peak very nicely.
2006 MK5 GTI -- Revo Stage 1 -- Neuspeed P-Flo -- OEM 'D' DV -- BSH Stage 2 PCV -- Forge Quickshifter -- BSH Pendulum Mount -- NS Boost Gauge + Pod

Offline SKAVIA

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 9
  • Posts: 277
    • Build thread
Re: Which uprated DV?
« Reply #18 on: July 19, 2009, 09:51:21 am »
Just bought the revision D as well.
Now, can anybody tell me how to fit it on an ED30 please!  :ashamed:
Looks like its just 3 bolts but I don't know where to find it on the car??? :confused:
I have a friend with some axle stands so I'm hoping thats a good start  :happy2:

Cheers!
SKAVIA

Offline SteveP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 117
  • -Receive: 340
  • Posts: 6005
    • My Project
Re: Which uprated DV?
« Reply #19 on: July 19, 2009, 10:27:27 am »
No need for axel stands with the ED30.

It you take off the engine cover then it's right in front of the engine  :happy2:



Like you siad it's three bolts and one connector, job done  :pomppomp:

Offline SKAVIA

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 9
  • Posts: 277
    • Build thread
Re: Which uprated DV?
« Reply #20 on: July 19, 2009, 01:37:11 pm »
Fantastic! Cheers Steve!  :drinking:
Anything I need to do after fitting it or is it just plug and play?

Offline Poppa Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 40
  • Posts: 1553
Re: Which uprated DV?
« Reply #21 on: July 20, 2009, 11:01:55 am »
Plug and Play  :happy2:

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Which uprated DV?
« Reply #22 on: July 20, 2009, 11:18:38 am »
tony , did you log before and after???
interested to know if the boost 'profile' is different between the valve types?
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline tony_danza

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 112
  • Posts: 3013
  • The voice of objective reason, but mine's best.
Re: Which uprated DV?
« Reply #23 on: July 20, 2009, 11:40:56 am »
nah - used the ass dyno instead... was pound for pound with my mate's R36 in a 4th & floor it test, now I sail right past him.
Sideways yo!

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Which uprated DV?
« Reply #24 on: July 20, 2009, 10:32:03 pm »

Personally i would run OEM in my own car for daily use..... but with a 3071 i'd go aftermarkert :)
Interesting you mention that turbo. Will revo supply software for it?
Without traction power is nothing!