General > Product Reviews
LED Door Warning Lights - Review
blade4real2004:
Thanks for the feedback Paul will be ordering few things from over time I think
fab5freddy:
--- Quote from: marko on January 30, 2013, 11:09:52 pm ---exact same as above.....
might try changing the pins around
--- End quote ---
Just thinking there Marko, might try changing to standard bulb. Could be that the LED bulbs are throwing the fault? What you think?
marko:
let you know in a little while..although i have them on the rear aswell with no problems!!
i think the pin numbers on front might be prob as there seems to be a few variations of 12v and ground pins
Eddie-NL:
--- Quote from: fab5freddy on January 30, 2013, 03:58:39 pm ---
--- Quote from: marko on January 29, 2013, 11:25:06 pm ---my front warning lights work fine but have a fault that erases but comes striaght back...
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN3.lbl
Part No SW: 1K0 959 702 M HW: 1K0 959 702 M
Component: Tuer-SG 005 0988
Coding: 0000756
Shop #: WSC 01279 785 00200
VCID: 397317DB70B264D0262
1 Fault Found:
00121 - Outside Warning Light/Door exit Light Passenger Side
012 - Electrical Fault in Circuit
:surprised: :surprised:
--- End quote ---
Just fitted mine and have the same problem, anyone any ideas?
--- End quote ---
LEDs that is why
Eddie-NL:
--- Quote from: marko on January 31, 2013, 01:19:51 pm ---let you know in a little while..although i have them on the rear aswell with no problems!!
i think the pin numbers on front might be prob as there seems to be a few variations of 12v and ground pins
--- End quote ---
Rear Door Controller is a slave of the front
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version