Make a donation

Author Topic: Mass air flow sensor - Passat 20v related.  (Read 950 times)

Offline swgti

  • Always Involved
  • ****
  • Thank You
  • -Given: 28
  • -Receive: 6
  • Posts: 440
  • GTI owners are born not manufactured!
Mass air flow sensor - Passat 20v related.
« on: November 11, 2012, 09:05:30 am »
Warning light and ecu check are showing up a intermittent fault with the MAF on my 2003 Passat 2.0 20v, this probably explains the stalling issue I sometimes have too.

Is it just a case of simply replacing the MAF unit or is there any setting up I need to do afterwards?

Also once replaced will the warning light go away on its own or will I need to reset it? can this be done manually by twiddling dash stalks etc like you do to reset service message?
Laser Blue 3dr No 209683, Leather, Monza II's and a few other goodies...........GONE but not forgotten......now in an A4 S-Line Avant 170tdi......god I miss the Gti.

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: Mass air flow sensor - Passat 20v related.
« Reply #1 on: November 11, 2012, 12:37:30 pm »
IIRC some people recommend removing the battery for 30mins to allow the ECU to recalibrate afterwards.
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Mass air flow sensor - Passat 20v related.
« Reply #2 on: November 11, 2012, 01:55:36 pm »
I would just replace the maf.
iirc if the car goes through 3 cycles of running without getting a same fault code then the dash warning light should extinguish itself though the fault code will remain stored in the ecu.
Without traction power is nothing!