Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Remove exhaust cutout on R32 rear bumper  (Read 1452 times)

Offline Kalpsn2000

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 56
  • Posts: 1612
Remove exhaust cutout on R32 rear bumper
« on: November 11, 2012, 11:17:17 am »
I need a tip regarding the title. I have unclipped the lower clips but just cannot do the top ones :ashamed:

Is it just a case of pulling hard? Don't want to great it.

Want to swap over today so any quick tip will be greatly appreciated.
Logged
Diamond Black 2007 (56) Golf GTI 3Dr DSG ¦ 18" Monza II's ¦ Cruise control ¦ MFSW ¦ Highline ¦ Rear parking sensors ¦ PDT Stage 1 ¦ Forge Twintake ¦ H&R Sport Springs ¦ NQSBBK ¦ R32 Rear bumper ¦ BCS Powervalve Sports R32 style TBE ¦ Valeo LED Rear Lights ¦ Xenon lights with HID kit ¦ DNX521DAB ¦ 12mm Spacers all round ¦

Offline StephenED30

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 53
  • Posts: 486
  • Edition 40 No 135
Re: Remove exhaust cutout on R32 rear bumper
« Reply #1 on: November 11, 2012, 11:44:07 am »
Easier to take the complete assembly off the car, if you have got a problem getting it off thing of how you are going to refit it.
Fitting guide here.  :happy2:

http://forums.vwvortex.com/showthread.php?3754634
Logged

Offline Kalpsn2000

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 56
  • Posts: 1612
Re: Remove exhaust cutout on R32 rear bumper
« Reply #2 on: November 11, 2012, 12:01:30 pm »
I am having an issue removing just the exhaust cutout. The bumper is off the car. The top row of clips are tough to remove.
Logged
Diamond Black 2007 (56) Golf GTI 3Dr DSG ¦ 18" Monza II's ¦ Cruise control ¦ MFSW ¦ Highline ¦ Rear parking sensors ¦ PDT Stage 1 ¦ Forge Twintake ¦ H&R Sport Springs ¦ NQSBBK ¦ R32 Rear bumper ¦ BCS Powervalve Sports R32 style TBE ¦ Valeo LED Rear Lights ¦ Xenon lights with HID kit ¦ DNX521DAB ¦ 12mm Spacers all round ¦

Offline Nodz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 73
  • -Receive: 103
  • Posts: 1977
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,29264.0.html
Re: Remove exhaust cutout on R32 rear bumper
« Reply #3 on: November 11, 2012, 12:20:24 pm »
I had grief with mine, the exhaust heat shield is blocking a few of the clips so that needs to come off. I worked from one end used a screw driver to lever the clips out. PITA job but it does come out eventually
Logged

Offline Kalpsn2000

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 56
  • Posts: 1612
Re: Remove exhaust cutout on R32 rear bumper
« Reply #4 on: November 11, 2012, 12:24:26 pm »
Quote from: Nodz on November 11, 2012, 12:20:24 pm
I had grief with mine, the exhaust heat shield is blocking a few of the clips so that needs to come off. I worked from one end used a screw driver to lever the clips out. PITA job but it does come out eventually

Ah thought that might be the issue as have managed to get the edge clips out but the centre is stuck :fighting:

Thanks
Logged
Diamond Black 2007 (56) Golf GTI 3Dr DSG ¦ 18" Monza II's ¦ Cruise control ¦ MFSW ¦ Highline ¦ Rear parking sensors ¦ PDT Stage 1 ¦ Forge Twintake ¦ H&R Sport Springs ¦ NQSBBK ¦ R32 Rear bumper ¦ BCS Powervalve Sports R32 style TBE ¦ Valeo LED Rear Lights ¦ Xenon lights with HID kit ¦ DNX521DAB ¦ 12mm Spacers all round ¦

Offline Nodz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 73
  • -Receive: 103
  • Posts: 1977
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,29264.0.html
Re: Remove exhaust cutout on R32 rear bumper
« Reply #5 on: November 11, 2012, 12:27:08 pm »
On mine the clips for the heat shield had melted so broke the clips so mine hasn't got a heat shield on it but I haven't had any issues
Logged

Offline Kalpsn2000

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 56
  • Posts: 1612
Re: Remove exhaust cutout on R32 rear bumper
« Reply #6 on: November 11, 2012, 12:38:50 pm »
Quote from: Nodz on November 11, 2012, 12:27:08 pm
On mine the clips for the heat shield had melted so broke the clips so mine hasn't got a heat shield on it but I haven't had any issues

Yes my heat shield clips have melted also. I took two of them off and managed to reach the other cutout clips without removing the heat shield fully.

Thanks mate :happy2:
Logged
Diamond Black 2007 (56) Golf GTI 3Dr DSG ¦ 18" Monza II's ¦ Cruise control ¦ MFSW ¦ Highline ¦ Rear parking sensors ¦ PDT Stage 1 ¦ Forge Twintake ¦ H&R Sport Springs ¦ NQSBBK ¦ R32 Rear bumper ¦ BCS Powervalve Sports R32 style TBE ¦ Valeo LED Rear Lights ¦ Xenon lights with HID kit ¦ DNX521DAB ¦ 12mm Spacers all round ¦

Offline Kalpsn2000

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 56
  • Posts: 1612
Re: Remove exhaust cutout on R32 rear bumper
« Reply #7 on: November 11, 2012, 06:37:54 pm »
Finished changing the bumpers over but have a slight issue now. While removing the licence plate light/parking sensor connector (the main connector on the rear drivers side) I snapped the clip. So when putting it back in I used duct tape to hold it together and it looked fine. But after finishing I turned the ignition on and it came up with the light out warning and the licence plate light/rear parking sensors don't work, just get a long beep then nothing.

I can feel,the connector is still connected as I can reach under the bumper but I assume its not tight enough.

So is it an easy fix or not?

P.S. Really like the bumper and new lights but this has put a downer on the change :sad1:
Logged
Diamond Black 2007 (56) Golf GTI 3Dr DSG ¦ 18" Monza II's ¦ Cruise control ¦ MFSW ¦ Highline ¦ Rear parking sensors ¦ PDT Stage 1 ¦ Forge Twintake ¦ H&R Sport Springs ¦ NQSBBK ¦ R32 Rear bumper ¦ BCS Powervalve Sports R32 style TBE ¦ Valeo LED Rear Lights ¦ Xenon lights with HID kit ¦ DNX521DAB ¦ 12mm Spacers all round ¦
Pages: [1]   Go Up
« previous next »