Q for those running spacers

[BeezerDiesel]

Can those of you who are running/have run rear spacers tell me if the rear hub has a big enough spigot to run a non hub-centric 8mm spacer?
It's throwing it down with rain outside so I'm not brave enough to whizz a wheel off to look.

Thanks 

[candy turbo]

if you use 8 mm spacers your wheel will not locate on the hub , you can use 5 mm ones with spigot rings this will locate on to the chamfered edge of your wheel , not purfect but better than not at all
  much better ot get wheels with 42-45 et off set to bring them in to the arches

[BeezerDiesel]

Cheers Candy Turbo.
My summer wheels are 8x18 ET44 (VZ033s) but I'm running Black Detroits at the mo for the winter and they sit in the arches a bit too much for my liking (probably better aerodynamics though and won't chuck so much cow poop up the sides of the car!) at 7.5x18 and ET51.
I saw some cheap H&Rs in 8mm but I'll hold out for some slightly wider hubcentic ones I think. 

[candy turbo]

if you go for hub centric go for h&r i brought some fk ones and they snapped with in a week