Help changing front pads cupra?

[Sam89]

Is there a how to guide on this, I have a cupra k1 so I have the big calipers,
How do I take the calipers off to change the pads?

Cheers sam

[rich83]

On the back on the caliper there should be 2 plastic caps... remove those and use a 7mm hex socket to remove the guide pins. You then should be able to put the caliper off the carrier, pull the pads out and install the new ones. 

[Sam89]

On the back on the caliper there should be 2 plastic caps... remove those and use a 7mm hex socket to remove the guide pins. You then should be able to put the caliper off the carrier, pull the pads out and install the new ones. 

Thanks mate!
I just wasn't sure on which bolts to remove, sure ill crack it now   

[Tfsi_Mike]

Some useful info for you here; http://www.seatcupra.net/forums/showthread.php?t=192247

**Edit

Dan is going to find the pics on his PC that have been dropped as the hosting account is no longer active

[Sam89]

Thanks guys!
Got these fitted today took me less than an hour,
Only thing I found was the pads I had bought had wear sensors and my old pads don't and I couldn't find anywhere to connect it to?
Ended up chopping the wire off, alls fine tho 

[rich83]

Should be on the passenger side. There is a 2 wire loom which come out of the arch to the right of the suspension strut, where one cable is the ABS and one cable is the wear sensor.