Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RNS510 and midline. Coding needed?  (Read 1157 times)

Offline tonto83

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 2
  • Posts: 139
    • Email
RNS510 and midline. Coding needed?
« on: November 27, 2012, 07:27:44 pm »
I've managed to persuade the other half to get me an RNS510 for Xmas.

Currently I have a mfsw and midline display.  I realise if I had the highline I would have the rns display on the dash.

My question is, do I need to get the rns coded or is it just just a straight swap over?

Probably a stupid question.

Cheers,

Paul
Logged

Offline fab5freddy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 238
  • -Receive: 239
  • Posts: 2033
Re: RNS510 and midline. Coding needed?
« Reply #1 on: November 27, 2012, 09:12:29 pm »
Hey Paul,

Just requires you to tell the can gateway you have installed sat nav.

Tick number 37 in the installation list, job done  :happy2:
Logged

Offline tonto83

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 2
  • Posts: 139
    • Email
Re: RNS510 and midline. Coding needed?
« Reply #2 on: November 27, 2012, 10:05:59 pm »
Thanks James, appreciate that :)
Logged

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6330
Re: RNS510 and midline. Coding needed?
« Reply #3 on: November 27, 2012, 10:40:58 pm »
If you have the oem amp under your passenger seat (sound pack option) then you'll also need to code the rns510 for it to lower its output to the amp.
Logged
Without traction power is nothing!

Offline tonto83

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 2
  • Posts: 139
    • Email
Re: RNS510 and midline. Coding needed?
« Reply #4 on: November 28, 2012, 03:01:34 pm »
Thanks for the reply Bacillus but my car doesn't have such luxuries.
Logged
Pages: [1]   Go Up
« previous next »