Make a donation

Author Topic: Removed ITG Now It Keeps Cutting/Erratic Idle  (Read 1843 times)

Offline Adam_

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 43
Removed ITG Now It Keeps Cutting/Erratic Idle
« on: January 20, 2013, 08:53:36 pm »
Hi there got a bit of a problem I need sorted ASAP.

I have recently removed my ITG induction and put my standard air box on. The problem is it now won't idle and is very erratic so much so it stalls. Disconnecting the MAF sorts it out. Now for the confusing thing,

I popped the ITG back on and it's fine? Runs as it should. I have removed the battery for a day to try and see if it resets the ECU's expectations to no avail. The ECU is remapped :sad1:

Fault code is:

17497 - Mixture Regulation; Bank 2; Range 1
P1089 - 001 - Lean Limit Exceeded

Thanks in advance.

Offline Russ_leeds

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 24
  • -Receive: 16
  • Posts: 526
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #1 on: January 20, 2013, 09:17:31 pm »
faulty/damaged maf housing on the standard air box?
Black 2007 gti, 18' monza 2, sat-nav, highline, i-pod dock, armrest, 35mm H&R springs, WALK, BCS tbe, autotech front and rear arbs, ITG maxogen, NQSBBK... and more to come

Offline Adam_

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 43
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #2 on: January 20, 2013, 09:40:00 pm »
faulty/damaged maf housing on the standard air box?

All pipes and housing checked and its all in order with no cracks or leaks.

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #3 on: January 20, 2013, 09:48:50 pm »
If it worked fine with the ITG both times, then the ECU needs to adapt to the OEM air box. When swapping back, drive it gently for a while and build the power on gently after a good few miles so it doesnt run lean.
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline Adam_

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 43
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #4 on: January 20, 2013, 10:10:48 pm »
If it worked fine with the ITG both times, then the ECU needs to adapt to the OEM air box. When swapping back, drive it gently for a while and build the power on gently after a good few miles so it doesnt run lean.

It wont get out of the garage without stalling :-(

Offline samdem

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 174
    • Email
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #5 on: January 20, 2013, 10:13:54 pm »
just let it idle in your garage for a while and then take it out for a little bit

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #6 on: January 21, 2013, 10:06:21 am »
Have you  checked to see whether the seal is on the maf sensor and not fallen off when removing it from the itg
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=1qo5s8tm5jgifa5fpdbqi4oduu&/topic,19740.0.html
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #7 on: January 21, 2013, 11:29:13 am »
Try resetting the fuel trims.

Offline Adam_

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 43
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #8 on: January 21, 2013, 12:08:10 pm »
Try resetting the fuel trims.

How do I do this?

I presume via vagcom? Mine is playing up :-(

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #9 on: January 21, 2013, 12:58:30 pm »
Try resetting the fuel trims.

That's unlikely to make any difference. And yes, you need vcds to reset the trim measurement.
Without traction power is nothing!

Offline chungster

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 33
  • Posts: 1963
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #10 on: January 21, 2013, 02:14:26 pm »
Check the OEM air box that nothing is blocked in there

Offline Adam_

  • Taking part
  • ***
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 43
Re: Removed ITG Now It Keeps Cutting/Erratic Idle
« Reply #11 on: January 21, 2013, 06:56:45 pm »
Check the OEM air box that nothing is blocked in there

Nothing is blocked, and no vac leaks  :confused: