Make a donation

Author Topic: Installing Xenon Headlights  (Read 2089 times)

Offline saadn

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 79
    • Email
Installing Xenon Headlights
« on: December 09, 2012, 05:08:38 pm »
I've got a complete set of xenon headlights with the 10-12 pin adapters for my gt tdi. Is installing simply a case of removing the halogen lamps and connecting the xenons using the adapters or does it require more extensive work? These are the adapters I have:

http://www.ebay.co.uk/itm/390409641277?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Offline apples12

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 34
  • Posts: 563
Re: Installing Xenon Headlights
« Reply #1 on: December 09, 2012, 05:31:08 pm »
Will most likely also need coding with vagcom, I'd highly recommend installing the pin 11 wire for the high beam shutter

(I like the sig :happy2:)

Ali
MK6 GT TDI  - CW - LUX pack
GONE
MkV Golf 1.9TDI Sport in DBP, 160,000 miles and climbing!

Retrofits by me:GT front end,OEM bixenons with auto-levelling/washers, Valeo LED Rears, MFSW + Highline SWCM, Cruise Control, 30byte Highline CECM, Highline clocks, Rain/Light Sensor, Auto-dimming Rear view Mirror, RNS-510 LED (Ver H; SW: 4020), Fiscon Basic Bluetooth, MDI + Aux, Armrest, Reverse Camera LOW, TPMS..what next...

Offline saadn

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 79
    • Email
Re: Installing Xenon Headlights
« Reply #2 on: December 09, 2012, 07:22:08 pm »
Will most likely also need coding with vagcom, I'd highly recommend installing the pin 11 wire for the high beam shutter

(I like the sig :happy2:)

Ali

How would I go abouts installing pin 11?

Might need to put that as a decal on the car.

Offline thegolfather

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 22
    • Email
Re: Installing Xenon Headlights
« Reply #3 on: December 13, 2012, 01:25:46 am »
i'm interested too, any updates on 11 pin and why?

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: Re: Installing Xenon Headlights
« Reply #4 on: December 13, 2012, 07:09:00 am »
Pin 11 activates the bi-xenon functionality which opens a shutter when on high beam.

Jas

VCDS (Preston, Lancashire)

Offline saadn

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 79
    • Email
Re: Installing Xenon Headlights
« Reply #5 on: December 13, 2012, 08:14:05 am »
i'm interested too, any updates on 11 pin and why?

http://www.myturbodiesel.com/1000q/a5/HID-retrofit-Jetta-a5.htm

I followed this tutorial. Still need to install pin 11 and get them coded.

Offline Moz

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 11
  • Posts: 361
    • Email
Re: Installing Xenon Headlights
« Reply #6 on: December 13, 2012, 03:47:21 pm »
Same here, I  had help installing Xenons. but it's as easy as lights out lights in. once you remove under tray and front bumper.

You'll need a wire for Pin 11 runs through the bulk head to the CCM under the pass side I believe and then re activating as Bi Xenon in VCDS,

Offline saadn

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 79
    • Email
Re: Installing Xenon Headlights
« Reply #7 on: December 14, 2012, 08:54:06 am »
Same here, I  had help installing Xenons. but it's as easy as lights out lights in. once you remove under tray and front bumper.

You'll need a wire for Pin 11 runs through the bulk head to the CCM under the pass side I believe and then re activating as Bi Xenon in VCDS,

Isn't it wired to under the drivers side?

Offline GTI_UK

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 2
  • Posts: 172
Re: Installing Xenon Headlights
« Reply #8 on: December 14, 2012, 11:50:12 am »
Does anyone have a pic of what the shutter looks like? (might be a silly question).

I bought some Brand new OEM replacements and they have (exactly like the OEMs) a halogen for high beam - so how does this shutter work? Both the halogen high beam and xenon come on together?

Offline thegolfather

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 22
    • Email
Re: Installing Xenon Headlights
« Reply #9 on: December 14, 2012, 05:34:11 pm »
thanks for info

Offline Moz

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 11
  • Posts: 361
    • Email
Re: Installing Xenon Headlights
« Reply #10 on: December 14, 2012, 07:28:27 pm »
Same here, I  had help installing Xenons. but it's as easy as lights out lights in. once you remove under tray and front bumper.

You'll need a wire for Pin 11 runs through the bulk head to the CCM under the pass side I believe and then re activating as Bi Xenon in VCDS,

Isn't it wired to under the drivers side?

Possibly I can't remember, but it goes to the control unit , I'm not sure which side this is on.

Offline saadn

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 79
    • Email
Re: Installing Xenon Headlights
« Reply #11 on: December 15, 2012, 11:19:00 am »
Does anyone have a pic of what the shutter looks like? (might be a silly question).

I bought some Brand new OEM replacements and they have (exactly like the OEMs) a halogen for high beam - so how does this shutter work? Both the halogen high beam and xenon come on together?


 This video may help you out a bit.