Awesome GTi Rolling Road Day - 23rd Feb 2013

[JMerrie]

Below is the details for a Northern (Manchester) Rolling Road Day available to all members.

EVENT:
Awesome GTi Rolling Road Day

LOCATION:
Awesome GTi, Unit 1 Siemens Road, Northbank Industrial Park, Irlam, Manchester, M44 5AH

DATE:
Saturday 23rd February 2013

TIME:
09:00 - 16:00

DETAILS:
Come along to Awesome GTi in Manchester for a VAG Rolling Road Day.
Come see all that you have missed over the Christmas period and have a catchup. Awesome will have their rollers running for a Maximum of 20 Cars so this will be on a strictly first come first served basis. I will need to take a deposit of £15.00 for those wanting to go on the rollers as I will need to pay over for 10 Cars the weekend before to guarantee the garage for the event. I will try and arrange a BBQ or Food of some kind which can be purchased (cheap  :) ), ideas on food is welcome.

COSTS:
The event to attend and meet-up is FREE!!
Rolling Road (2WD) £35.00 for Power Runs & Printout
Rolling Road (4WD) £45.00 for Power Runs & Printout

We need a minimum of 10 Cars to go on the rollers to confirm the event

Put your names below and state if your just attending, or include your car make & model if you want to go on the rollers:

[VWPalmer]

If I'm not working I'll come, need to check dates when I get to work on saturday.

[JMerrie]

No worries Dude ... just let me know and i will add you to the list!!
Hope you can make it!!

[Shorty]

I'll be up for that...

Shorty - ED30.

[JMerrie]

I'll be up for that...

Shorty - ED30.

Added to the list Shorty!!

[tommy_a]

Put me down for this please!!

Tom - Mk5 R32

[Andy]

might have a look down and go on the rollers--Could do with knowing what my tdi is putting out on the standard clutch

[C4MKV]

I was there yesterday with my mk5 and somehow pulled 420 lb/ft of torque on their dyno, so I'm not really sure of the accuracy of it! It's just stage 2 with the required mods, bhp was about right at 253 though.

[andybon]

Might see if i can get the day off work. Be nice to meet up with everyone and get to know a few people.

[VWPalmer]

I'm at work :( dont fancy driving all the way down to get a duff readout either haha

[tony_danza]

I was there yesterday with my mk5 and somehow pulled 420 lb/ft of torque on their dyno, so I'm not really sure of the accuracy of it! It's just stage 2 with the required mods, bhp was about right at 253 though.

The torque has been over reading for ages, by about 20% judging by the fact my stock 135i made 300hp and 360ftlb, hp is very accurate, however tq should be 300ftlb.

That aside, they do run a good dyno day.

[PDT]

I was there yesterday with my mk5 and somehow pulled 420 lb/ft of torque on their dyno, so I'm not really sure of the accuracy of it! It's just stage 2 with the required mods, bhp was about right at 253 though.

The torque has been over reading for ages, by about 20% judging by the fact my stock 135i made 300hp and 360ftlb, hp is very accurate, however tq should be 300ftlb.

That aside, they do run a good dyno day.

Peak power is likely to be accurate but low and mid power will be incorrect.

[Frodo-anni]

I was there yesterday with my mk5 and somehow pulled 420 lb/ft of torque on their dyno, so I'm not really sure of the accuracy of it! It's just stage 2 with the required mods, bhp was about right at 253 though.

The torque has been over reading for ages, by about 20% judging by the fact my stock 135i made 300hp and 360ftlb, hp is very accurate, however tq should be 300ftlb.

That aside, they do run a good dyno day.

Mike you tempted to run the new toy?

[tony_danza]

Possible. Might be a bit of a faff if I'm the only RWD though

[RobH]

Mine should be here by then, so could make that two rwd's. Sunglasses is always up for a dd aswell. Awesome is only an hour away from me and havnt been in ages.