Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Disc change  (Read 1969 times)

Offline Tortaruga

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 36
  • -Receive: 105
  • Posts: 1527
Disc change
« on: December 17, 2012, 11:35:16 am »
I need to change out my front discs, but not the pads (they're fine).

Can I take just off the caliper carrier with the two 21mm bolts - will the calipers & carrier come off together? Or must I remove the calipers first and then the carrier?

Cheers
Logged
'07 Red manual

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
Re: Disc change
« Reply #1 on: December 17, 2012, 07:00:39 pm »
calipers bolt directly to hub, remove 2 bolts, little screw holding disc on usually siezed on.
Logged

Offline andybon

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 8
  • Posts: 540
Re: Disc change
« Reply #2 on: December 17, 2012, 07:04:44 pm »
And your old pads will be bedded to your old disks, So any deep scouring on the old disks may happen on the new ones.
Logged
How hard can it be?

Nasir

  • Guest
Re: Disc change
« Reply #3 on: December 17, 2012, 07:22:15 pm »
I wouldn't use an old set of pads on new discs, but that's my OCD.
Logged

Offline MattR32T

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 6
  • Posts: 284
    • Email
Re: Disc change
« Reply #4 on: December 17, 2012, 08:40:33 pm »
I'd personally changed the pads at the same time aswell
Logged

Offline OSB

  • Always Involved
  • ****
  • Thank You
  • -Given: 32
  • -Receive: 17
  • Posts: 406
Re: Disc change
« Reply #5 on: January 11, 2013, 04:50:53 pm »
If there is plenty of meat left on the pads and there is only light scoring you can flat the surface by rubbing them on a sheet of abrasive paper which in turn on a flat surface like piece of glass. You have to be very carful that you don't wear down one side more that another.
Can be done - ive done it several times in my finacially poor youth.
But as has been said - best to fit new pads. Is running into the back of a car worth a few quid .....
Logged

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=2084ppca6f9nc99243asetms0u&/topic,19740.0.html
Re: Disc change
« Reply #6 on: January 11, 2013, 04:53:40 pm »
Quote from: biffobear on December 17, 2012, 07:00:39 pm
calipers bolt directly to hub, remove 2 bolts, little screw holding disc on usually siezed on.

Not quite

The calipers are bolted to the carrier. You need to take the caliper off and then remove the carrier.

Logged

Offline john a

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 11
  • Posts: 404
    • The Veneers Cover Band
Re: Disc change
« Reply #7 on: January 11, 2013, 10:04:57 pm »
For the price of a set of OE spec pads, I'd be chucking the old ones away.
Logged
Pages: [1]   Go Up
« previous next »