Audio menu gone

[Eddie-NL]

I'm sure that the polar is to blame here, the fact that the newer polar doesn't even require coding or fault clearing after fitting.

As there are several variations to the fusebox. The fuse for the instrument cluster is a 5A and is in the fusebox inside the car

Check the coding in the RCD510 that BAP has not been ticked, It might be worth trying your old rcd300

[Baz300]

Check the coding in the RCD510 that BAP has not been ticked, It might be worth trying your old rcd300

How can I check for BAP in the coding?

I can't seem to see anything about BAP when I am in the radios coding

[bacillus]

You need to look in the long coding helper and the check box for BAP is on one of the screens as you go throgh the coding

[Baz300]

You need to look in the long coding helper and the check box for BAP is on one of the screens as you go throgh the coding

I had a look through the long coding helper and didn't see BAP in any of the screens

[Baz300]

This is all I get in the radio long coding helper

[bacillus]

Not sure why but you should see this in byte 7 which you don't seem to have in your pic...  



NB this pic is with a RNS510

[Hedge]

He has an RCD not an RNS. 

[bacillus]

He has an RCD not an RNS. 

I pointed out that the pic was for a rns510 but the coding should be similiar for the rcd510 as I could see nothing related to navigation in that screen.

[Baz300]

Not sure why but you should see this in byte 7 which you don't seem to have in your pic...  



NB this pic is with a RNS510

That is in the navigation module though, I don't have NAV.

I have only been going through the radio module to get the coding.

[Eddie-NL]

On your units coding

The last digit is a 4, see if you can manually code that to a 2