Fitting cruise control

[Baz300]

I will be fitting a cruise control stalk soon.

I don't need to change the steering controller as mine is already compattable with cruise control but will I have to remove it to fit the stalk?

Only reason I am asking is that I noticed that it needs a t8 torx bit for the controller which ill have to buy if it does need to come out

[rich83]

I had to do the same.... ball ache to find a t8!

[Eddie-NL]

http://www.ebay.co.uk/itm/Mini-Star-Screwdriver-Precision-Torx-Star-Bits-in-a-3-in-1-Mobile-Torx-Driver-/160928344635?pt=UK_Hand_Tools_Equipment&hash=item257813aa3b

[fab5freddy]

I will be fitting a cruise control stalk soon.

I don't need to change the steering controller as mine is already compattable with cruise control but will I have to remove it to fit the stalk?

Only reason I am asking is that I noticed that it needs a t8 torx bit for the controller which ill have to buy if it does need to come out

Baz, I'll post you mine if your happy to post it back 

[fab5freddy]

Or you can go with Ed's

Too slow 

[Baz300]

http://www.ebay.co.uk/itm/Mini-Star-Screwdriver-Precision-Torx-Star-Bits-in-a-3-in-1-Mobile-Torx-Driver-/160928344635?pt=UK_Hand_Tools_Equipment&hash=item257813aa3b

Thanks 

Will get one orderd

I will be fitting a cruise control stalk soon.

I don't need to change the steering controller as mine is already compattable with cruise control but will I have to remove it to fit the stalk?

Only reason I am asking is that I noticed that it needs a t8 torx bit for the controller which ill have to buy if it does need to come out

Baz, I'll post you mine if your happy to post it back 

Thanks for the offer

But for the sake of £1.75 ill just buy the one in the link
Might need to use one at some point again

[GrayMK5GTI]

When I fitted my cruise, I ended up making that torx into a flat head screw with a junior hacksaw