PolarFIS+ Advanced : New Update v0.3.3 [23-01-2013]

[JMP]

I bought from obd.fi for a total of 250 euros (includes taxes also). http://www.obd.fi/index.php?page=shop.product_details&flypage=shop.flypage&product_id=183&category_id=9&manufacturer_id=0&option=com_virtuemart&Itemid=29

I got it with free shipping just by asking. Im not sure if they have english language pages.

[Cupra R]

Well I have just tried to update mine and its now bricked my unit. All I get is an error to say contact reseller  

EDIT: While searching the Polar forum I cam across a manual updater which allowed me to clear a scrambled firmware update. This then put the firmware version to N/A. I then tried the online updater again to upload the latest firmware but still wouldn't have it. Now trying to clear it again and reload the previous firmware. Not having much luck with that at the mo.

EDIT 2: So managed to clear it and have loaded 0.3.2R again. This seems to have taken.

I keep getting this message lately. I just persevered and it then went through.

[bacillus]

[I keep getting this message lately. I just persevered and it then went through.

Apparently there was a corrupt file in the red_dot english version firmware  that has now been replaced... 

[Matto]

I would say that was probably the issue as when I connected it to the local updater in the firmware version box it showed a load of garbage. Something like 0*3|!sZc 

[Cupra R]

[I keep getting this message lately. I just persevered and it then went through.

Apparently there was a corrupt file in the red_dot english version firmware  that has now been replaced... 

I got the message last time too when updating to v0.3.2

[bacillus]

I would say that was probably the issue as when I connected it to the local updater in the firmware version box it showed a load of garbage. Something like 0*3|!sZc 

You tried reflashing the 3.3 version again?

[bacillus]

I got the message last time too when updating to v0.3.2

What version firmware are you now using Rich?

[Cupra R]

I got the message last time too when updating to v0.3.2

What version firmware are you now using Rich?

I'm on the latest V0.3.3 

[JMP]

Damn, I should take it out again for an update.. Are you all just flashing the box in car without removing it? I dont quite have my wlan coverage into my carage, so are the flash files available also somewhere to flash without network?

[Cupra R]

Yeah. I update whilst still connected to the car. The FIS has an option on the main screen for updates.

[Matto]

I would say that was probably the issue as when I connected it to the local updater in the firmware version box it showed a load of garbage. Something like 0*3|!sZc 

You tried reflashing the 3.3 version again?

I haven't had chance to try as I was on my way out to work earlier and wanted it useable so stuck with the 0.3.2 firmware. Will try again later. For info I remove mine from the car when I update.

[Matto]

I have just successfully updated to 0.3.3R.

[pitsirikas]

Is highline a must for this or you can use it with the midline too?

[bacillus]

Is highline a must for this or you can use it with the midline too?

You must have a highline mfd...