Make a donation

Author Topic: Cam follower replacement on a 2005 Gti  (Read 1043 times)

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Cam follower replacement on a 2005 Gti
« on: January 25, 2013, 12:05:23 pm »
Hi,

I went to try and replace my cam follower today but I was unable to as my car being an earlier model has a metal fuel line on one of the connections instead of a rubber one (could not get enough space to undo this one). So I was unable to get enough movement to get in and remove the old follower. Can anyone help me with this?

Thanks

Ian

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Re: Cam follower replacement on a 2005 Gti
« Reply #1 on: January 25, 2013, 02:44:17 pm »
Found this guide which has the same set up as my gti: http://freepdfhosting.com/8791e81dac.pdf

Para 10 is the issue I have!

Where can I get on of these: 12-point 8mm torx bit

Anyone?

Offline RobboGTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 7
  • Posts: 338
Re: Cam follower replacement on a 2005 Gti
« Reply #2 on: January 25, 2013, 02:52:05 pm »
eBay, or online, have to search for it unfortunately. Not a very common tool bit!

Offline ianv5

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 12
  • Posts: 437
Re: Cam follower replacement on a 2005 Gti
« Reply #3 on: January 25, 2013, 02:54:36 pm »
eBay, or online, have to search for it unfortunately. Not a very common tool bit!

Thats the problem I have had a look and can't find one  :sad1:

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Cam follower replacement on a 2005 Gti
« Reply #4 on: January 25, 2013, 02:57:35 pm »
Check with a local engineering tool supplier using yellow pages.
Without traction power is nothing!

Offline Aas

  • Taking part
  • ***
  • Thank You
  • -Given: 7
  • -Receive: 1
  • Posts: 34
    • Email
Re: Cam follower replacement on a 2005 Gti
« Reply #5 on: January 25, 2013, 08:31:47 pm »
When I done this on my 55 plate I couldn't get that pipe off either so I undone the clips holding the pipe in place further down it and it allowed me to pull the pump out far enough to change the follower