Author Topic: Struggling with gears? :/ (Read 1465 times)

James5763 · « **on:** January 22, 2013, 05:38:16 pm »

Hi I've noticed that sometimes I'm struggling getting it in and out of gear and also when on flat surface I can be in 1st with clutch all the way down and it's still biting and taking me forward, any ideas? Thanks 2.0 tdi gt

Dubbin · « **Reply #1 on:** January 22, 2013, 06:40:56 pm »

Seems that your clutch is dragging. Assuming it is a hydraulic clutch I would try bleeding the slave cylinder. If cable clutch try adjusting it.

James5763 · « **Reply #2 on:** January 23, 2013, 10:18:33 am »

Any idea how to bleed?

James5763 · « **Reply #3 on:** January 26, 2013, 01:01:46 pm »

New clutch needed apparently ;(

john87 · « **Reply #4 on:** January 26, 2013, 08:59:02 pm »

Quote from: James5763 on January 26, 2013, 01:01:46 pm

New clutch needed apparently ;(

who told you that, a VW dealer?

James5763 · « **Reply #5 on:** January 26, 2013, 09:38:41 pm »

No a local mechanic, I don't see how it's a new clutch when it's biting more then slipping..... Also was told by another mechanic to bleed the clutch, I have no idea to be frank

vRSAlex · « **Reply #6 on:** January 26, 2013, 09:46:41 pm »

Does the pedal feel normal? Any play at the start kf the travel?

James5763 · « **Reply #7 on:** January 26, 2013, 10:23:47 pm »

Peddle feels fine, car sets off quick as its already on bite and the last 3-4 of travel on the way up don't do anything on the clutch

vRSAlex · « **Reply #8 on:** January 26, 2013, 10:36:13 pm »

You on high miles? Sounds like the cluch friction plate has worn out and the cover plate is at full adjustment.

James5763 · « **Reply #9 on:** January 27, 2013, 09:50:25 am »

I'm at 125k with a gt tdi, had a flywheel and clutch put in 4k ago but these had done 60k I believe, this was when I first bought the car

vRSAlex · « **Reply #10 on:** January 27, 2013, 10:45:57 am »

Seems odd to put a 60k used clutch in a car. Only around 200 for a brand new clutch kit.

Was the cover plate that was fitted adjusted back to original 'new' settings with a special tool or just chucked in?

James5763 · « **Reply #11 on:** January 27, 2013, 12:54:35 pm »

I believe it was flywheel and clutch that was done as the fly wheel was beyond gone, I couldn't tell you, my guess would be chucked in

James5763 · « **Reply #12 on:** January 27, 2013, 01:21:34 pm »

Just been told its a self adjusting clutch

vRSAlex · « **Reply #13 on:** January 27, 2013, 01:27:11 pm »

Quote from: James5763 on January 27, 2013, 01:21:34 pm

Just been told its a self adjusting clutch

Yes. When it reaches full adjustment then it cant release the cover. If a used one is refitted then it needs adjusting back to original new adjustment.

Author Topic: Struggling with gears? :/ (Read 1465 times)

James5763

Struggling with gears? :/

Dubbin

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

john87

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

vRSAlex

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

vRSAlex

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

vRSAlex

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

James5763

Re: Struggling with gears? :/

vRSAlex

Re: Struggling with gears? :/